Arbre à cames ECH S42 304° 12.60 de levée - 850.00 HT
Precio : 1016.60 € TTC (x1)

Guide butée - 109.00 € ht
Precio : 130.80 € TTC (x2)

Cale pied alu pilote - 142.00 HT
Precio : 170.40 € TTC (x1)

Flasque INT de moyeu AR - 317.00 HT
Precio : 380.40 € TTC (x1)

Chapeaux de ressort (diam 60)- 2 x 49.75 HT - 99.50 HT
Precio : 119.40 € TTC (x2)

Kit boulonnerie rondelle / cale pour support étrier pour jambe d'origine / étrier = 2 x 42.00 = 84.00 € ht
Precio : 100.80 € TTC (x1)

Mécanisme embrayage diamètre 184 (bi-disques)- 794.00 HT
Precio : 952.80 € TTC (x1)

Guide ressort sur combiné diamètre 56 mm - 18.30 HT
Precio : 21.96 € TTC (x1)

Gros radiateur d huile sous radiateur d eau - 282.61 HT
Precio : 338.00 € TTC (x1)

Tulipe de pont renforcée (diamètre 112) PP (diamètre axe 30) 2 x 222.61 = 445.22 HT (pas dispo en ce momment)
Precio : 534.26 € TTC (x1)

Tringle complète avec rotules - 68.50 HT
Precio : 82.20 € TTC (x1)
Cales de voie (15/20) 2 x 109.95 HT - 219.90 HT
Precio : 263.00 € TTC (x1)

Kit boulons / joints pour flexible HP D.A. - 22.00 € HT
Precio : 26.40 € TTC (x1)

Aile AV droite Polyester - 264.11 HT
Precio : 316.83 € TTC (x1)

Courroie Alternateur (dimension orig.) - 28.00 HT
Precio : 33.60 € TTC (x1)

Bagues de coulisse amortisseur (diamètre 41) 2 x 35.01 HT - 70.02 HT
Precio : 84.02 € TTC (x1)

Poulie A.A.C ADM - 168.74 HT
Precio : 202.49 € TTC (x1)

Kit entretoises complet, kit boulonnerie, réglages Prodrive, rotules SMG 20 , canons porte rotule... 2 x 498.50 HT - 997.00 HT
Precio : 1192.42 € TTC (x1)

Gros radiateur eau 100 % Alu - 536.00 HT
Precio : 643.20 € TTC (x1)

Récepteur embrayage (pour cloche S42) diamètre 20.64 - 95.00 HT
Precio : 113.62 € TTC (x1)

Moyeu roulement AV - 243.80 HT prix unitaire
Precio : 292.56 € TTC (x1)

Pompe de D.A haute pression en E.ST - 479.98 HT
Precio : 574.06 € TTC (x1)

Guide d'air radiateur - 91.09 € ht
Precio : 109.31 € TTC (x1)

Circlips - 2.88 HT
Precio : 3.46 € TTC (x1)

Support pompe de D.A alu renforcé (sans silentbloc) = 320 € ht
Precio : 384.00 € TTC (x1)
Entretoises pour suppression moyeu de roue central 2 x 119.98 HT - 239.96 HT
Precio : 287.00 € TTC (x1)

Piston tendeur de chaine S42 - 144.00 HT
Precio : 172.80 € TTC (x1)

Variante F.A.M : support alu ou noir
Precio : 0.00 € TTC (x1)

Joint de coffre ultra léger (L.3.40) - 79.00 HT
Precio : 94.80 € TTC (x1)

Séparateur de déjaugeage droit S14 - 149.67 HT
Precio : 179.00 € TTC (x1)

Barre stabilisatrice réglable (diam 24)- 485.79 HT
Precio : 582.95 € TTC (x1)

Support bobine acier + boulons = 59.00 HT
Precio : 70.80 € TTC (x1)

Tulipes de gros pont pour autobloquant à disque (diamètre 112 ou 120) 2 x 169.63 = 339.26 HT
Precio : 407.11 € TTC (x1)

Liteau à coussinet d'echappement S42 - 1089.00 HT (dispo. en date du 13/02/2017)
Precio : 1306.80 € TTC (x1)

Filtre à air double cône SP boîte à air - 106.60 € HT
Precio : 127.92 € TTC (x1)

Poulie de D.A courroie plate - 89.00 HT
Precio : 106.80 € TTC (x1)

Poussoir Carré S42 (prix pièce)- 140.00 HT
Precio : 168.00 € TTC (x1)

Patte AV support pompe D.A. - 25.80 € ht
Precio : 30.96 € TTC (x1)

Kit triangles AV renforcés 2 x 192.00 = 384.00 HT
Precio : 460.80 € TTC (x1)

Joint de carter bas moteur "à gorge" = 28.67 HT
Precio : 34.40 € TTC (x1)
MO dépose et repose du pont - 2.80 x 84.00 = 235.20 HT
Precio : 282.24 € TTC (x1)

Tuyau de remplissage de D.A - 35.00 HT
Precio : 41.86 € TTC (x1)

Kit manchons de réglage hauteur ressorts - 220.00 HT
Precio : 264.00 € TTC (x1)

Collecteur diam 51 + 2 en 1 - 2850.00 HT
Precio : 3420.00 € TTC (x1)

Anodisation de nos pièces Alu Couleurs au choix : noir, bleu, rouge, orange (prix par pièce de 15 à 30 euros selon modèle)
Precio : 29.00 € TTC (x1)

Aile AR gauche - 325.00 HT
Precio : 390.00 € TTC (x1)

Double Interface adaptation S42 (pour boîte séquentielle 26kg)- 1203.27 HT
Precio : 1443.92 € TTC (x1)

Pare choc AV - 501.66 HT
Precio : 601.99 € TTC (x1)
Afficheur / faisceau / coupure /contacteur (pour boîte 6 séquentielle)- 787.43 HT
Precio : 944.92 € TTC (x1)
Support fixation PC latéral côté gauche look origine finition carbone - 85.00 € ht
Precio : 102.00 € TTC (x1)

Entretoise acier de rotule diam. 10 pour fixation de biellette barre stab =
Precio : 0.00 € TTC (x1)

Disques spéciaux Percés (diamètre 312) 2 x 345.00 = 690.00 HT
Precio : 828.00 € TTC (x1)

Injecteur Gros débit pour Simple rampe (prix unitaire)
Precio : 198.54 € TTC (x1)

Plaque fermeture VM S14- 45.00 € HT
Precio : 54.00 € TTC (x1)

Silencieux central avec ses deux coudes - 429.77 HT
Precio : 514.00 € TTC (x1)

Rotules de berceau (petite tête pour passage fourche berceau) 2 x 268.33 = 536.66 HT
Precio : 643.99 € TTC (x1)

Kit cales de voies 25 mm auto-centreuses - 110.00 HT
Precio : 131.56 € TTC (x1)

Pignon de chaîne Distribution, Vilebrequin S14 - 98.69 HT
Precio : 118.43 € TTC (x1)

Câble de liaison Ethernet (entre boîtier et ordinateur)- 17.56€ HT
Precio : 21.00 € TTC (x1)

Flexible haute pression D.A SP préformé - 224.00 HT
Precio : 268.80 € TTC (x1)

Combiné AR complet / base Bilstein = 2 x 747.00 = 1494.00 HT
Precio : 1792.80 € TTC (x1)

Biellettes complètes (avec boulonnerie et entretoises) de barre Stab AV réglables - 2 x 143.00 = 286.00 HT
Precio : 343.20 € TTC (x1)

Kit Rotor Stator pour réfection pompe à huile S14 - 150.00 HT
Precio : 180.00 € TTC (x1)

BTR de maintien de traverse long. diam 16 ou 14 / L 180 - 2x 28.32 = 56.64 HT
Precio : 67.96 € TTC (x1)

Biellette réglable sur rotule de pipe admission - 95.00 HT
Precio : 114.00 € TTC (x1)

Capteur de régime long S14 / S42
Precio : 113.62 € TTC (x1)

Couple petit pont 5.00 (188mm)- 1380.00 HT
Precio : 1656.00 € TTC (x1)

Vilbrequin moteur S42 course 85 EVO2 (12.470 kg)- 2960.00 HT
Precio : 3552.00 € TTC (x1)

Kit CANON de triangle AR GrA avec Rotule (diam. 30 Ep 12 Diam. int. 12) et entretoises sans maintien - 234.18 HT
Precio : 281.02 € TTC (x1)

Kit des 2 supports Alu de barre stabilisatrice avec boulonnerie - 82 HT
Precio : 98.40 € TTC (x1)

Biellette de direction TDC complète (avec soufflet)= 628.00 HT
Precio : 753.60 € TTC (x1)

Boulons SP et entretoise pivot - 2 x 38.00 = 76.00 HT
Precio : 91.20 € TTC (x1)
Barre anti-rapprochement Alu spéciale compétition;Barre anti-rapprochement Alu spéciale compétition
Precio : 263.00 € TTC (x1)

Goujons de maintien de traverse AR - 2 x 43.83 = 87.66 HT
Precio : 105.19 € TTC (x1)
Kit bagues haut direct sur pivot usiné - 67.73 HT
Precio : 81.00 € TTC (x1)

Sonde T° 150°C 10 x 100 Spécifique STACK - 73.66 HT
Precio : 88.39 € TTC (x1)

Pipe à eau GR.A (sans thermostat) = PLUS LIVRABLE
Precio : 0.00 € TTC (x1)

Butée hydraulique - 445.00 HT
Precio : 534.00 € TTC (x1)

Bol de disque AR 12 trous(prix unitaire)- 248.00 HT
Precio : 297.60 € TTC (x1)
Boulons de bielle S42 suivant marque et modèle (prix sur demande de 19 à 30 euro)
Precio : 0.00 € TTC (x1)

T de remplissage et support sonde (eau) Moteur S14 et S42 - 75.00 HT
Precio : 89.70 € TTC (x1)
Jeu de plaquettes EVO 2 Carbone - 396.32 HT
Precio : 474.00 € TTC (x1)
Flasque de fixation sur cornet origine - 74.41 HT
Precio : 89.00 € TTC (x1)

Joint de culasse GR.A diam.94 épaisseur 1.8 - 345.00 ht (aucune dispo et pas de délai)
Precio : 414.00 € TTC (x1)

Plaque alu prédécoupée embout de longeron - 15.00 HT
Precio : 18.00 € TTC (x1)

Batterie 34 AH 250/97/152 - 230.00 HT
Precio : 275.08 € TTC (x1)

Coupelles longues - 2 x 79.85 HT - 159.70 HT
Precio : 191.64 € TTC (x1)
Arbre à cames S14 - 304 ° levée 11.50 (prix unitaire) - 780.02 HT
Precio : 932.90 € TTC (x1)

Pochette de joints pour boite 6 Sadev = 142.00 HT
Precio : 170.40 € TTC (x1)

Pour pouvoir monter le kit il faut faire 2 chapes spéciales de renfort sur
les longerons du véhicules 2 X 35 = 70.00 HT
Precio : 84.00 € TTC (x1)

Coupelles longues 2 x 79.85 - 159.70 HT
Precio : 191.64 € TTC (x1)
Boulon de bielle renforcé (prix pièce)- 33.44 HT
Precio : 40.00 € TTC (x1)
Kit freinage (diamètre 332) : étriers 4 pistons AP (montage sur fusées origines)- 4207.72 HT
Precio : 5049.26 € TTC (x1)
Total : 41097.78 € TTC