
Joint de carter bas moteur "à gorge" = 28.67 HT
Precio : 34.40 € TTC (x2)

Capot AR Polyester - 267.56 HT
Precio : 320.00 € TTC (x2)

Kit prise barre stab AR à souder / caisse = 75 € ht
Precio : 90.00 € TTC (x1)

Support anti-brouillard Droit sur PC Polyester - 85.20 HT
Precio : 102.24 € TTC (x1)

Support pédalier GR.A - 185.00 HT
Precio : 222.00 € TTC (x1)

Disque AR GR.A diam.280/25/177.80/12T - 2 x 578.00 = 1156.00 HT
Precio : 1387.20 € TTC (x3)

Maitre Cylindre AP AV - 218.00 HT (photo non contractuelle)
Precio : 261.60 € TTC (x1)

Tulipe courte pour boîte SADEV - 182.00 HT
Precio : 218.40 € TTC (x1)

Boîte 6 manuelle SADEV(consigne 3000 € ou boîte 5 OR M3 E30)- 13882.00 HT
Precio : 16658.40 € TTC (x2)

Kit entretoise de montage haut amort. AV anodisé - 2 x 78.10 = 156.20 HT
Precio : 187.44 € TTC (x1)

Coussinets de bielle Tri-métal Motorsport Diamètre 48 Moteur S14 (Prix unitaire)- 38.50 HT
Precio : 46.20 € TTC (x1)

Capot moteur Polyester - 346.00 HT
Precio : 415.20 € TTC (x2)

Emetteur de pression huile 0-10 bars / alarm. 2 bars / 10x100 - 95.00 HT
Precio : 114.00 € TTC (x1)

Pédale d'embrayage GR.A alu - 380.00 HT
Precio : 456.00 € TTC (x2)

Renfort de tunnel - 175.00 HT
Precio : 210.00 € TTC (x1)
Vitres AV Makrolon avec trappes 2 x 125.00 HT - 250.00 HT
Precio : 299.00 € TTC (x2)

Préparation berceau pour S42 - 379.60 HT
Precio : 454.00 € TTC (x1)

Rotules spéciales de direction noyau diam 12 pas à Droite 2 x 93.00 HT - 186.00 HT
Precio : 223.20 € TTC (x1)

Cache Carbone couvre radiateur - 229.93 HT
Precio : 275.92 € TTC (x1)

Joint de carter Inférieur (S42) Papier - 15.80 HT
Precio : 18.90 € TTC (x2)

Kit pions à souder de rigidification de traverse AR - 95.00 HT
Precio : 113.62 € TTC (x1)

Kit boulons de couple conique 14/150 - 88.00 HT
Precio : 105.60 € TTC (x1)

Tendeur de chaine distribution S14 - 101.50 HT
Precio : 121.80 € TTC (x1)
Pare brise chauffant teinté vert - 620.00 HT
Precio : 744.00 € TTC (x2)

Joint de culasse multi-feuilles diam 94.00 / épaisseur 1.3 mm / 1.5 mm / 2 mm ou 3 mm - 280.00 HT
Precio : 336.00 € TTC (x1)

PC AV LOOK E92 L (PETIT KIT)- 349.50 HT
Precio : 418.00 € TTC (x1)

Rotules grand angle spéciales 4 x 233.40 HT = 933.60 HT
Precio : 1120.32 € TTC (x2)
Kits boulonnerie : 2 berceaux, 2 mains/longeron, 2 mains/fusée,
contre-écrous de rotules 2 x 85.00 HT - 170.00 HT
Precio : 204.00 € TTC (x2)

Poulie crantée de tendeur de D.A - 8.50 HT
Precio : 10.20 € TTC (x1)

Bloc double optiques (loupe) gauche - 250.00 HT
Precio : 299.00 € TTC (x1)

Joint de porte ultra léger sans armature métallique (L 4.10) - 82.00 HT
Precio : 98.40 € TTC (x1)

Crapotines complètes (gros diamètre) réglables en hauteur 2 x 479.93 HT - 959.86 HT
Precio : 1151.83 € TTC (x1)

Carter GrA ou DTM - 1392.61 HT
Precio : 1671.13 € TTC (x1)

Pont complet Fonte avec autobloquant à 75 % et couple 5.71 (44.5 kg)- 4782.61 HT
Precio : 5739.13 € TTC (x2)

Rampe de capot PRODRIVE complète avec cibié diam 200 et Xénon
Precio : 0.00 € TTC (x1)
Poussoir rond pour moteur M42 remplacement origine (prix unitaire)- 57.69 HT
Precio : 69.00 € TTC (x1)

Ecrou de cardan (prix unitaire)- 10.00 HT
Precio : 12.00 € TTC (x1)

Traverse support de PC AR orig. - 356.77 € ht
Precio : 428.12 € TTC (x2)

Joint collecteur échappement sur culasse M42 - 2 x 15.50 HT - 31.00 HT
Precio : 37.20 € TTC (x2)
Kit chasse - Supports et silentblocs durs excentrés (réservé compétition)- 379.60 HT
Precio : 454.00 € TTC (x1)

Support étrier AR Radial "tous type" - 2 x 189.00 = 378.00 HT
Precio : 453.60 € TTC (x1)

Ligne intermediaire AR - 585.00 € ht
Precio : 702.00 € TTC (x2)
Pistons S14 93.52 de diamètre et 84.00 de course - 281.77 HT
Precio : 337.00 € TTC (x1)

Couple petit pont 5.28 (188mm) - 1580.00 HT
Precio : 1896.00 € TTC (x1)

Dérivateur / base origine sans thermostat - 250.00 ht
Precio : 300.00 € TTC (x1)

Kit extension croix de porte (des 2 côtés)- 315.00 € HT (P.U.)
Precio : 378.00 € TTC (x2)

Plaque haute centrale Carbone (non percée)- 17.95 HT
Precio : 21.54 € TTC (x2)

Joint de queue de soupape S42 diam. 5 (prix unitaire) - 6.04 HT
Precio : 7.25 € TTC (x2)

Triangles Alu renforcés 3.5 cm de voie 2 x 288.00 HT - 576.00 HT
Precio : 691.20 € TTC (x1)

Support AV étrier / fusée prodrive
Precio : 0.00 € TTC (x1)

Rotule de berceau (sans fourche) - 192.03 € HT
Precio : 230.44 € TTC (x1)
Ressorts Rallye, Côte, Circuit - 2 x 129.60 HT - 259.20 HT
Precio : 311.04 € TTC (x2)

Support de traverse de PC AV en alu - 2 x 85.00 = 170.00 HT
Precio : 204.00 € TTC (x1)

Vilbrequin moteur S42 course 85 EVO2 (12.470 kg)- 2960.00 HT
Precio : 3552.00 € TTC (x2)
Barre anti rapprochement Alu spéciale compétition - 263.00 HT
Precio : 315.60 € TTC (x1)

Joint de coffre ultra léger (L.3.40) - 79.00 HT
Precio : 94.80 € TTC (x2)

Kit support inox ligne échap. GR.A comprenant 2 supports de silencieux avec silentblocs et support de double Y sur cloche - 68.00 € ht
Precio : 81.60 € TTC (x1)

Crochet de remorquage Alu (AV)- 34.28 HT
Precio : 41.00 € TTC (x1)

Photo train AR monté
Precio : 0.00 € TTC (x2)

Kit refroidissement huile complet - 683.00 HT
Precio : 819.60 € TTC (x1)

Carter de distribution orig. - 289.02 HT
Precio : 346.82 € TTC (x2)
Bougies Racing (SP moteur S42) Prix unitaire de 29.30 à 54.80 euro TTC suivant modèle
Precio : 0.00 € TTC (x2)

Ventilo de dégivrage - 35.00 HT
Precio : 42.00 € TTC (x1)

Traverse PC AV préparée
Precio : 0.00 € TTC (x1)

Disjoncteur Thermique avec déclenchement 10/15/20 ou 25 AMP - 47.31 HT (PLUS LIVRABLE)
Precio : 56.77 € TTC (x2)

Barre stabilisatrice réglable(4)diam 24 Rallye - 535.00 HT
Precio : 642.00 € TTC (x1)

Support assymétrique à souder sur bout de longeron - 2 x 54.00 = 108.00 HT
Precio : 129.60 € TTC (x1)
Kits boulonnerie cardan 2 x 29.68 HT - 59.36 HT
Precio : 71.00 € TTC (x1)

Capteur de vitesse à voyant pour Stack - 120.00 HT
Precio : 143.52 € TTC (x1)

Biellette de direction côté crémaillère femelle 2 x 68.14 HT - 136.28 HT
Precio : 163.00 € TTC (x1)

Guide d'air radiateur - 91.09 € ht
Precio : 109.31 € TTC (x1)

Grand patin distribution = 523.60 € ht (dispo au 22/05/2024)
Precio : 628.32 € TTC (x1)

Lobro renforcé diam 108 ep. 40 28c = 267.00 HT (pièce)
Precio : 320.40 € TTC (x2)

Bol de disque AR 8 trous (prix unitaire)- 248.00 HT
Precio : 297.60 € TTC (x1)
Vitres AR Latérales Margard 2 x 108.00 HT - 216.00 HT
Precio : 258.34 € TTC (x1)

Silentblocs de support boîte renforcés 2 x 30.00 = 60.00 € HT
Precio : 72.00 € TTC (x1)

Fourreaux de biellette de direction (mâle/mâle) 2 x 51.94 - 103.88 HT
Precio : 124.66 € TTC (x1)
Kit boulonnerie - 19.23 HT
Precio : 23.08 € TTC (x1)

Bouton interrupteur Warning - 20.90 HT
Precio : 25.08 € TTC (x1)
Huile spéciale Visco 1.8 x 29.72 HT - 53.50 HT
Precio : 64.20 € TTC (x1)

Mécanisme embrayage diamètre 184 (tri-disques)- 969.17 HT
Precio : 1163.00 € TTC (x1)

Support de disjoncteurs thermiques clipsables à visser - 30.60 HT (x4) (PLUS LIVRABLE)
Precio : 36.72 € TTC (x1)

Joint de culasse GR.A diam.94 épaisseur 1.8 - 345.00 ht (aucune dispo et pas de délai)
Precio : 414.00 € TTC (x1)

Poulie diam. 75 alu alternateur = 108.00 HT
Precio : 129.60 € TTC (x2)

Bras AR de base 2 x 771.32 HT - 1542.64 HT
Precio : 1845.00 € TTC (x2)
Entretoises 2 x 29.68 HT - 59.36 HT
Precio : 71.23 € TTC (x1)

Double Y pour collecteur GrA (commun au lat. ou sortie AR) "ancien modèle" - 1006.00 HT
Precio : 1207.20 € TTC (x2)

Tripode pour fabrication arbre de transmission - 150.00 HT
Precio : 180.00 € TTC (x1)

Gros support moteur côté droit (mécano-soudé) pour S42 avec passage collecteur échappement - 285.00 HT
Precio : 340.86 € TTC (x1)

Attache pot échappement en inox à souder - 18.00 HT
Precio : 21.60 € TTC (x3)

Cale de butée hydraulique - 52.27 HT
Precio : 62.72 € TTC (x1)

Emetteur embrayage court à clips - 125.00 HT
Precio : 149.50 € TTC (x1)

Kit ligne échappement latéral complet (sans collecteur) 100 décibels - 2520.00 HT
Precio : 3024.00 € TTC (x2)

Mécanisme embrayage diamètre 184 (bi-disques)- 794.00 HT
Precio : 952.80 € TTC (x1)

Fourreau de direction Pas à Droite et Gauche (pour biellette coté crémaillère origine) - 58.00 HT
Precio : 69.37 € TTC (x1)

Ventilateur moteur M3 E30 origine - 317.80 HT
Precio : 380.09 € TTC (x1)
Courroie plate de D.A - 30.99 HT
Precio : 37.18 € TTC (x1)
EPROM ALPHA Z
Precio : 538.00 € TTC (x1)

Rondelle de boulon de vilebrequin (S14 2.5L)- 17.71 HT
Precio : 21.18 € TTC (x2)

Kit caisson / renfort / prise amortisseur AR GR.A - 450.00 HT (se monte avant l'arceau)
Precio : 540.00 € TTC (x3)

Kit 12 boulons de bol fixation disque (long 26 sous tête) = 46.33 HT
Precio : 55.60 € TTC (x1)

Disques de frein EVO 1 (diamètre 356/32 48V) Poids 6.5kg - 2 x 583.00 HT - 1166.00 HT
Precio : 1399.20 € TTC (x1)

Courroie générale SP EVO pour poulie alt. diam. 75 alu = 38.00 HT
Precio : 45.60 € TTC (x1)

Clavettes Mono Gorge diamètre 5 (prix pièce)- 2.00 HT
Precio : 2.39 € TTC (x1)

Anti-parasite seul /embout de fil à bougie (S42)- 65.00 HT
Precio : 78.00 € TTC (x1)

Biellette de direction côté crémaillère mâle 2 x 68.14 HT - 136.28 HT
Precio : 163.00 € TTC (x1)

Coupelles vissantes 2 x 37,63 - 75.26 HT
Precio : 90.31 € TTC (x1)
Ressorts Rallye 2 x 125.00 HT - 250.00 HT
Precio : 300.00 € TTC (x1)

Protection de plancher intégral en kevlar/ carbone - 2 x 420 = 840.00 € ht
Precio : 1008.00 € TTC (x1)

Bol AR GR.A pour Brembo 8T - 248.00.00 HT
Precio : 297.60 € TTC (x1)
Arceau boulonné - 597.83 HT
Precio : 715.00 € TTC (x1)

Kit complet EVO 1 avec disques (356), étriers AP 6 pistons, bols, jeu de plaquettes et kit boulons/cales de fixation
Precio : 0.00 € TTC (x1)

Double coude avec silencieux - 884.00 HT
Precio : 1060.80 € TTC (x2)

Guide ressort sur combiné diamètre 56 mm - 18.30 HT
Precio : 21.96 € TTC (x2)

Amortisseurs Bilstein (diam. 41) NR 2 x 468.00 HT - 936.00 HT
Precio : 1123.20 € TTC (x1)

Mano de jauge à essence programmable STACK (diamètre 52mm) - 161.28 HT
Precio : 193.54 € TTC (x1)

Becquet grand modèle (sans fixation)" - 269.87 HT
Precio : 323.84 € TTC (x1)

Bol de disque AR 12 trous(prix unitaire)- 248.00 HT
Precio : 297.60 € TTC (x1)

Bas de caisse polyesther - 2 x 155.00 = 310.00 HT
Precio : 372.00 € TTC (x1)

Bras de triangle 2 x 340.00 = 680.00 HT
Precio : 816.00 € TTC (x1)

Poulie entrainement D.A. - 157.00 HT
Precio : 188.40 € TTC (x1)

Disque de frein AR diam. 304/25 = 2 x 452.00 = 904.00 HT
Precio : 1084.00 € TTC (x1)

Chape de biellette de direction côté crémaillère "rallye" = 120.00 HT
Precio : 144.00 € TTC (x1)

Faisceau 2ème rampe dans boîte à air (seul)
Precio : 275.08 € TTC (x1)

Support fixation PC AR latéral côté droit look origine finition standard - 40 € ht
Precio : 48.00 € TTC (x1)

Ligne échappement complète (sans collecteur)- 1380.00 HT
Precio : 1656.00 € TTC (x1)
Afficheur / faisceau / coupure /contacteur (pour boîte 6 séquentielle)- 787.43 HT
Precio : 944.92 € TTC (x1)

Nécessaire de montage pont ALU : flasque, roulement, joints, cale - 654.00 HT
Precio : 784.80 € TTC (x1)

Fourchette modifiée pour cloche adaptation S42 pour boîte séquentielle 26Kg - 85.00 HT
Precio : 102.00 € TTC (x1)

Emetteur embrayage Long plastique léger alu S14 - 148.00 HT
Precio : 177.60 € TTC (x1)

Collecteur diam 51 + 2 en 1 - 2850.00 HT
Precio : 3420.00 € TTC (x1)

Amortisseurs AR nu réglable alu "extra léger" - 2 x 732.00 = 1464.00 € ht
Precio : 1756.80 € TTC (x1)

Rampe nue de capot Optique (+ 200 diam.)- 259.20 HT
Precio : 310.00 € TTC (x1)

Volant Moteur pour embrayage diam. 184 Moteur S42 (4.2 Kg)- 530.00 HT
Precio : 636.00 € TTC (x2)

Cale créneaux ZF (pour autobloquant et glissement limité) Gros Pont - 68.80 HT
Precio : 82.28 € TTC (x1)
Pare choc AR polyesther - 342.00 HT
Precio : 410.40 € TTC (x1)

Préparation de traverse AR Evo. - 579.43 HT (+ consigne de traverse de base 300€ ht)
Precio : 695.32 € TTC (x1)

Poussoirs Motorsport 3.30 / 42 grammes (prix unitaire)- 117.00 HT
Precio : 139.93 € TTC (x1)
Renforts sky longeron droit et gauche 2 x 34.70 HT - 69.40 HT
Precio : 83.00 € TTC (x1)

Contacteur avec rehausse de bte sequentielle - 45.88 HT
Precio : 55.06 € TTC (x1)

Récepteur embrayage (pour cloche S42) diamètre 20.64 - 95.00 HT
Precio : 113.62 € TTC (x1)

Main acier zingué = + 30 € ht
Precio : 0.00 € TTC (x1)

Kit 8 disjoncteurs à déclanchement
(10A, 15A ou 25A) + 4 supports disjoncteurs et 1 support Alu - 559.36 HT
Precio : 669.00 € TTC (x1)

Liteau à coussinet d'admission S42 - 1089.00 HT (dispo. en date du 13/02/2017)
Precio : 1306.80 € TTC (x1)

Amortisseurs Bilstein (diamètre 41) 2 x 341.00 HT - 682.00 HT
Precio : 818.40 € TTC (x1)

Silentbloc et cales de support moteur S42 - 85.00 HT
Precio : 101.66 € TTC (x1)
Soupape échappement Motorsport (prix unitaire)- 205.69 HT
Precio : 246.00 € TTC (x1)

Vitre pour rétroviseur 90cm2 (verre/miroir)- 28.80 HT P.U.
Precio : 34.56 € TTC (x1)

Kit frein AV disques diamètre 345 avec étriers, supports étrier, plaquettes HP et boulonnerie
Precio : 0.00 € TTC (x1)
Boîte 6 séquentielle seule (41 Kg / rapports interchangeables)- 11 202.34 HT
Precio : 13398.00 € TTC (x1)

Rotule de biellette de barre Stab AV 2 x 28.09 HT - 56.18 HT
Precio : 67.18 € TTC (x1)

Silentbloc ligne échappement (Prix unitaire)- 8.36 HT
Precio : 10.00 € TTC (x1)

Faisceau rampe led bouton simple - 31.00 € ht
Precio : 37.20 € TTC (x1)

Kit 2 Biellettes de barre stabilisatrice renforcé AR sur rotule - 221.00 HT
Precio : 265.20 € TTC (x1)

Anodisation de nos pièces Alu Couleurs au choix : noir, bleu, rouge, orange (prix par pièce de 15 à 30 euros selon modèle)
Precio : 0.00 € TTC (x1)

Baguette de jonction pavillon custode M3 - 135.00 HT
Precio : 162.00 € TTC (x1)

Boîtier de gestion électronique SRA-E - 1395.00 € HT
Precio : 1668.42 € TTC (x1)

Bols de disque EVO 1 (12T / 228.6)- 2 x 284.78 = 569.56 HT
Precio : 683.47 € TTC (x1)

Chapeaux de ressort (diamètre 65) 2 x 49.75 HT - 99.50 HT
Precio : 119.40 € TTC (x1)
Kit puit de jauge et mano essence (pour réservoir origine) - 146.32 HT
Precio : 175.58 € TTC (x1)

Collecteur échappement GrA - 2068.00 HT
Precio : 2481.60 € TTC (x1)

Kit 8 boulons de Volant moteur Longs M12x150 28mm - 46.40 HT
Precio : 55.50 € TTC (x1)

Jeu de segments 86.50mm - 4 x 47.00 = 188.00 HT
Precio : 225.60 € TTC (x1)

Sonde température air
Precio : 69.37 € TTC (x1)

Bobine allumage orig. - 110.00 ht
Precio : 132.00 € TTC (x1)

Filtre à air double cône SP boîte à air - 106.60 € HT
Precio : 127.92 € TTC (x1)

Pare choc AV orig. - 1115.00 HT
Precio : 1338.00 € TTC (x2)

Support de disjoncteurs thermiques clipsables à fiche - 30.60 HT (x4) (PLUS LIVRABLE)
Precio : 36.72 € TTC (x1)

Kit adaptation coupure sur boîte séquentielle - 253.34 HT
Precio : 304.01 € TTC (x1)

Kit vis et écrous pour flector renforcé - 35.59 HT
Precio : 42.71 € TTC (x1)

Disques de frein EVO 2 (diamètre 356/32 48V) Poids 5.7 kg - 2 x 679.00 = 1358.00 HT
Precio : 1629.60 € TTC (x1)

Kit des 2 supports Alu de barre stabilisatrice avec boulonnerie - 82 HT
Precio : 98.40 € TTC (x2)

Couple 4.45 (210mm)- 2150.00 HT
Precio : 2571.40 € TTC (x1)

Kit complet système molette de réglage pour amort. 2 voies = 48.50 HT
Precio : 58.20 € TTC (x1)

Pédale accélérateur Alu avec support / boulonnerie / rotule et dé - 259.00 HT
Precio : 310.80 € TTC (x1)

Couvercle de fausse culasse côté Admission - 34.26 HT
Precio : 40.98 € TTC (x1)

Kit soufflet tôle / cardan - 87.67 HT
Precio : 105.20 € TTC (x1)

Collecteur 4 en 2 et 2 en 1 diamètre 48 mm - 2799.33 HT
Precio : 3348.00 € TTC (x1)

Connecteur boîtier SRA-E pour faisceau - 80.00 HT
Precio : 95.68 € TTC (x1)

Protège carter alu (4.8 kg) - 225.00 HT
Precio : 270.00 € TTC (x1)
Boulons de bielle S42 suivant marque et modèle (prix sur demande de 19 à 30 euro)
Precio : 0.00 € TTC (x2)

Câble déclavetage marche arrière (boite séquentielle)- 117.00 HT
Precio : 140.40 € TTC (x1)

Traverse PC AR préparée
Precio : 0.00 € TTC (x1)

Damper DS S14 GrA avec D.A. (non amorti. 1,8kg)(nitruration ionique 0.1) - 678.00 HT
Precio : 813.60 € TTC (x1)

Préparations des 2 triangles - 1299.33 HT
Precio : 1554.00 € TTC (x1)

Support alternateur / D.A S42 - 87.75 HT
Precio : 105.30 € TTC (x1)

Kit de 2 anti-vibratoires entre supports anti-brouillard et la rampe de phares - 59.36 HT
Precio : 71.00 € TTC (x1)

Support Alu pour injecteur 2ème rampe (dans boîte à air) Prix unitaire - 32.00 HT
Precio : 38.40 € TTC (x1)

Support acier noir (à visser ou à souder) - 55.00 € ht
Precio : 66.00 € TTC (x2)

Plaque de chauffage - 135.00 HT
Precio : 162.00 € TTC (x1)

Barre stabilisatrice Evo.(diam 21/22)4R - 480.00 HT
Precio : 574.08 € TTC (x2)

Traverse support de PC AV orig - 481.35 ht (PAS DE DISPO NI DELAI)
Precio : 577.62 € TTC (x1)

Piston diam. 86,40 pour alesage 86.50 pour course 85 axe de 18 - 336.00 HT
Precio : 403.20 € TTC (x2)
Capteur de pression atmosphérique
Precio : 89.27 € TTC (x2)

Autobloquant 75 % Motorsport (188) - 1890.00 HT
Precio : 2268.00 € TTC (x1)

Cardan de colonne de direction - 210.00 HT
Precio : 251.16 € TTC (x1)

Clapets anti-déjaugeage huile - 3 x 18.00 HT - 54.00 HT
Precio : 64.58 € TTC (x1)

Kit double coude court evo. - 340 € ht
Precio : 408.00 € TTC (x1)

Circlips de moyeu 2 x 7.11 HT - 14.22 HT
Precio : 17.00 € TTC (x1)
Moyeux AR 2 x 149.67 HT - 299.34 HT
Precio : 358.00 € TTC (x1)

Poussoirs Motorsport 4.50 / 42 grammes(prix unitaire)- 117.00 HT
Precio : 139.93 € TTC (x1)

Kit 8 boulons de Volant moteur Courts M12x150 22mm - 46.40 HT
Precio : 55.50 € TTC (x1)

Préparation de traverse AR Evo. - 579.43 HT (+ consigne de traverse de base 300€ ht)
Precio : 695.32 € TTC (x1)
kit plots de main (diam.10)(4 plots / 1 main) = 8 x 5.80 = 46.40 HT
Precio : 55.68 € TTC (x1)
Total : 170426.90 € TTC