
Kit Crapotines sup Alu nue - 2 x 249.70 = 499.40 HT
Precio : 599.28 € TTC (x1)

Kit Rotor Stator pour réfection pompe à huile S14 - 150.00 HT
Precio : 180.00 € TTC (x1)

Injecteur Gros débit pour 2ème rampe (prix unitaire)
Precio : 163.85 € TTC (x1)

Ressorts Rallye 2 x 129.60 HT - 259.20 HT
Precio : 311.04 € TTC (x1)

Tôle de renfort de bloc S14 (entre bloc et carter) - 297.00 € HT
Precio : 356.40 € TTC (x1)

Butée embrayage GR.A renforcée (entièrement métallique) - 280.29 HT
Precio : 336.35 € TTC (x1)
Disque embrayage renforcé matière organique - 328.01 HT
Precio : 392.30 € TTC (x1)

Cale-pied pilote Carbone - 143.00 HT
Precio : 171.60 € TTC (x1)

Sonde température air
Precio : 69.00 € TTC (x1)

Kit Canons intérieurs Seuls - 180.00 HT
Precio : 216.00 € TTC (x1)

Photo train AV Tour de Corse
Precio : 0.00 € TTC (x1)

Poulie crantée de tendeur de D.A - 8.50 HT
Precio : 10.20 € TTC (x2)

Poulie de D.A courroie plate - 89.00 HT
Precio : 106.80 € TTC (x1)
MO changement couple - 2.80 x 84.00 = 235.20 HT
Precio : 282.24 € TTC (x1)

Flexible haute pression D.A SP préformé - 224.00 HT
Precio : 268.80 € TTC (x1)
Support de filtre à huile - 234.69 HT
Precio : 280.69 € TTC (x1)

Plaques de maintien crapotine Version XL 2 x 19.65 HT - 39.30 HT
Precio : 47.16 € TTC (x2)

Kit boulons / joints pour flexible HP D.A. - 22.00 € HT
Precio : 26.40 € TTC (x1)

Pompe de D.A HP pour dir. directe echg std (consigne 75 € HT) - 582.00 HT
Precio : 698.40 € TTC (x1)

Emetteur embrayage court à clips - 125.00 HT
Precio : 149.50 € TTC (x1)

Supports de chasse réglables pour triangles origines - 2 x 168.00 = 336.00 HT
Precio : 403.20 € TTC (x1)

Bloque barre stab latéral - 2 x 35 = 70.00 € ht
Precio : 84.00 € TTC (x1)

Poussoir Méca Ø 37,5 x 25 x 3,30 / 55 grammes(Prix unitaire)- 52.80 HT
Precio : 63.15 € TTC (x1)

Biellette de colonne de direction (pour D.A.)- 253.00 HT (plus livrable pour le moment)
Precio : 303.60 € TTC (x1)

Jauge tube 225mm VEDEO - 97.00 HT
Precio : 116.40 € TTC (x1)

Préparation berceau pour S14 (adaptation support moteur)- 795.00 HT
Precio : 954.00 € TTC (x1)
Kits boulonnerie : 2 berceaux, 2 mains/longeron, 2 mains/fusée,
contre-écrous de rotules 2 x 85.00 HT - 170.00 HT
Precio : 204.00 € TTC (x1)

Maitre Cylindre AP AR - 218.00 HT (photo non contractuelle)
Precio : 261.60 € TTC (x1)

Fourreaux de biellette de direction (mâle/mâle) 2 x 51.94 - 103.88 HT
Precio : 124.66 € TTC (x1)

Roulements spéciaux 2 x 95.00 HT - 190.00 HT
Precio : 227.24 € TTC (x1)
Kit tuyaux et raccords aérokip complet - 279.26 HT
Precio : 334.00 € TTC (x1)

Nécessaire de préparation Pipe Admission (Axe/Volet/Vis/brides)- 379.60 HT
Precio : 454.00 € TTC (x1)

Rotules grand angle spéciales 4 x 233.40 HT = 933.60 HT
Precio : 1120.32 € TTC (x1)

Couvercle de remplacement distributeur côté EC (Fabrication Delage sport)- 38.00 HT
Precio : 45.45 € TTC (x1)

Rotule de berceau (sans fourche) - 192.03 € HT
Precio : 230.44 € TTC (x2)

Triangles Alu renforcés 3.5 cm de voie 2 x 288.00 HT - 576.00 HT
Precio : 691.20 € TTC (x1)

Biellette de direction côté crémaillère femelle 2 x 68.14 HT - 136.28 HT
Precio : 163.00 € TTC (x1)

Vilebrequin moteur S14/7 course 77.40 EVO2 (13.640 kg)- 2680.00 HT
Precio : 3205.28 € TTC (x1)

Moyeu roulement AV - 243.80 HT prix unitaire
Precio : 292.56 € TTC (x1)

Mécanisme d'embrayage renforcé = 383.71 HT
Precio : 460.45 € TTC (x1)

Ventilo de dégivrage - 35.00 HT
Precio : 42.00 € TTC (x1)
Amortisseurs spécifiques sur rotule 2 x 324.00 = 648.00 HT
Precio : 777.60 € TTC (x1)
Petit Kit complet injection avec faisceau et 4 injecteurs et accessoires
Precio : 2930.20 € TTC (x1)

Plateau intermédiaire pour mécanisme embrayage diamètre 184 - 214.54 HT
Precio : 257.45 € TTC (x1)

Rotule SMG25 + rotule renforcée conique (prix unitaire)- 268.00 HT
Precio : 321.60 € TTC (x1)

Barre stabilisatrice réglable (diam 26)- 529.26 HT
Precio : 635.11 € TTC (x1)

Capteur d'allumage / cloche - 118.00 HT
Precio : 141.60 € TTC (x1)

Entretoises de rotule sur berceau 4 x 12.00 HT - 48.00 HT
Precio : 57.60 € TTC (x1)

Pédale accélérateur Alu avec support / boulonnerie / rotule et dé - 259.00 HT
Precio : 310.80 € TTC (x1)

Clavettes Mono Gorge diamètre 5 (prix pièce)- 2.00 HT
Precio : 2.39 € TTC (x2)

Joint de carter inférieur / bloc - 16.19 HT
Precio : 19.43 € TTC (x1)

Rampe de capot 4 x 200 Polyester - 185.00 HT
Precio : 222.00 € TTC (x1)

Barre anti-rapprochement Alu spéciale compétition - 263.00 HT
Precio : 315.60 € TTC (x1)
Préparation berceau spéciale pour réception moteur S14 (support sur berceau)- 379.60 HT
Precio : 454.00 € TTC (x1)
Pot échappement intermédiaire non catalysé Gr N et silencieux AR - 1091.97 HT
Precio : 1306.00 € TTC (x1)

Suppresseur Thermostat d'huile - 45 HT
Precio : 53.82 € TTC (x1)

Plaque console Carbone (non percée)- 55.02 HT
Precio : 66.02 € TTC (x1)

Guide ressort sur combiné diamètre 56 mm - 18.30 HT
Precio : 21.96 € TTC (x1)

Kit chasse silentblocs durs excentrés - 91.70 HT
Precio : 109.67 € TTC (x1)

Disque AR GR.A diam.280/25/177.80/12T - 2 x 538.00 = 1076.00 HT
Precio : 1291.20 € TTC (x1)

Sonde température eau
Precio : 53.22 € TTC (x1)
Filtre à air Haute Performance pour montage origine (nettoyable)- 53.51 HT
Precio : 64.00 € TTC (x1)

Jeu de boulon de culasse S14 - 82.70 HT
Precio : 99.24 € TTC (x1)
Arbre à cames S14 - 312 ° levée 12.70 (prix unitaire)- 780.02 HT
Precio : 932.90 € TTC (x1)

Plaque plancher Carbone (pilote)- 40.01 HT
Precio : 48.01 € TTC (x1)
Kit silentblocs durs pour barre stabilisatrice origine - 55.18 HT
Precio : 66.00 € TTC (x1)

Kit levier ultra léger alu rigide - 118.00 € ht
Precio : 141.60 € TTC (x1)

Portes moyeu usinés dans la masse 2 x 850.00 HT - 1700.00 HT
Precio : 2033.20 € TTC (x1)

Supports étrier AV (EVO 1) 2 x 285.00 HT - 570.00 HT
Precio : 684.00 € TTC (x1)

Bobine 2 sorties - 2 x 54.00 = 108.00 ht
Precio : 129.60 € TTC (x1)
Crapotines excentrées 2 x 97.83 HT - 195.66 HT
Precio : 234.00 € TTC (x1)
Kit chasse - Supports et silentblocs durs excentrés (réservé compétition)- 379.60 HT
Precio : 454.00 € TTC (x1)

Câble de réglage palommier de répartiteur mécanique 3/8me par 75 cm - 93.00 HT
Precio : 111.60 € TTC (x1)
Biellettes de barre stabilisatrice 2 x 164.72 HT - 329.44 HT
Precio : 394.00 € TTC (x1)

Kit 4 cornets droits Carbone - 480.02 HT
Precio : 574.10 € TTC (x1)

Fourreaux de biellette de direction (mâle/femelle) 2 x 68.56 - 137.12 HT
Precio : 196.00 € TTC (x1)

Rotules grand angle spéciales 4 x 233.40 HT = 933.60 HT
Precio : 1120.32 € TTC (x1)

Préparation pipe admission complète avec brides (moteur S14) - 1199.83 HT
Precio : 1435.00 € TTC (x1)

Phase 3 : -> 280 CV 9200 tr/m : bloc S14, 4 pistons 93.40, vilo retraité 72.6, bielles en H longues et coussinets EVO - 8799.33 HT
Precio : 10559.92 € TTC (x4)

Rampe inox injecteur - 295.00 € HT
Precio : 354.00 € TTC (x1)

Coupelles vissantes 2 x 37,63 - 75.26 HT
Precio : 90.31 € TTC (x1)

Tole d'embout lobro diam 108 = 24.84 HT (pièce)
Precio : 29.81 € TTC (x1)

Pour pouvoir monter le kit il faut faire 2 chapes spéciales de renfort sur
les longerons du véhicules 2 X 35 = 70.00 HT
Precio : 84.00 € TTC (x1)
Total : 75599.39 € TTC