Kit de toutes les douilles et entretoises de train AV = 194.80 HT
Precio : 233.76 € TTC (x1)
Kit 6 brides (uniquement pour les modèles après mars 2005) 6 x 10.18 HT - 61.08 HT
Precio : 73.00 € TTC (x1)

Compte tour Stack ST200 0.4-10.5 D.80 noir - 420.83 HT
Precio : 505.00 € TTC (x2)

Anodisation de nos pièces Alu Couleurs au choix : noir, bleu, rouge, orange (prix par pièce de 15 à 30 euros selon modèle)
Precio : 0.00 € TTC (x1)

Couple conique 5.71 (210mm) - 2679.77 HT
Precio : 3215.72 € TTC (x1)

Bols de disque EVO 2 (12T / 240)- 2 x 311.99 = 623.98 HT
Precio : 748.78 € TTC (x1)

Kit supports alu de barre stab AV = 2 x 35.00 = 70.00 HT
Precio : 84.00 € TTC (x1)

Cardans creux + légers pour version XXL 112 diam. 38 en E.ST - 2 x 580.00 HT - 1160.00 HT
Precio : 1392.00 € TTC (x1)
Kit boulonnerie d'amortisseur - 19.23 HT
Precio : 23.08 € TTC (x1)

Boulon embout de vilbrequin S14/7 - 23.93 HT
Precio : 28.72 € TTC (x1)

Palier central d'arbre de transmission (entraxe 130) - 195.00 HT
Precio : 234.00 € TTC (x1)

Limiteur, répartiteur hydraulique de pression à molette - 268.90 HT
Precio : 322.68 € TTC (x1)

Feuille de Panneau de porte Carbone 2 x 155.48 = 290.96 HT
Precio : 349.15 € TTC (x1)

Clavettes Mono Gorge diamètre 5 (prix pièce)- 2.00 HT
Precio : 2.39 € TTC (x1)
Cardan Gauche renforcé (obligatoire avec changement de pont)- 549.33 HT
Precio : 657.00 € TTC (x1)

Photo 3
Precio : 0.00 € TTC (x1)

Etrier de frein AR 4P AP pour fusée orig. S1 = 2 x 658.00 = 1316.00 HT
Precio : 1579.20 € TTC (x2)

Doigt Rotor S14 - 59.01 € HT
Precio : 70.81 € TTC (x1)

Connecteur boîtier SRA-E pour faisceau - 80.00 HT
Precio : 95.68 € TTC (x1)

Lobro diam. 108 ep.40 rainuré = 123.33 HT (pièce)
Precio : 148.00 € TTC (x1)

Boîtier de gestion électronique SRA-E - 1395.00 € HT
Precio : 1668.42 € TTC (x1)
Bocal de loockeed - 84.50 HT
Precio : 101.06 € TTC (x1)

Poulie entraînement de DA pour moteur S42 - 148.20 HT
Precio : 177.84 € TTC (x1)

Joint rond echap collecteur GR.A - 39.12 € ht (pièce)
Precio : 46.94 € TTC (x1)

Poussoir Méca Ø 37,5 x 28 x 6.00 / 55 grammes (Prix unitaire) - 45.00 HT
Precio : 53.82 € TTC (x1)

Entretoise alu inf de fixation amort. AR = 4 x 14.50 = 58.00 HT
Precio : 69.60 € TTC (x1)

Flector renforcé seul - 158.50 HT
Precio : 190.20 € TTC (x1)

Kit roulements de Gros Pont - 294.19 HT
Precio : 353.03 € TTC (x1)

Kit 8 boulons de Volant moteur Longs M12x150 28mm - 46.40 HT
Precio : 55.50 € TTC (x1)

Pont complet Corps Alu avec couple 5.71 et Visco 10/90% - 6994.98 HT
Precio : 8366.00 € TTC (x1)

Cache intérieur cloison (moyen) - 235.50 HT
Precio : 282.60 € TTC (x1)

Carter de pont ALU type 188- 2150.00 HT
Precio : 2580.00 € TTC (x1)
Bougies de remplacement Haute Performance 4 x 23,00
Precio : 92.00 € TTC (x1)

Cale-pied co-pilote Carbone - 215.00 HT
Precio : 258.00 € TTC (x1)

Kit 8 boulons de Volant moteur Courts M12x150 22mm - 46.40 HT
Precio : 55.50 € TTC (x1)

Injecteur Gros débit pour 2ème rampe (prix unitaire)
Precio : 163.85 € TTC (x1)

Pot intermédiaire GrN Bi-tube Inox diamètre 50 - 657.00 HT
Precio : 788.40 € TTC (x1)
Ressorts Côte - 2 x 125.00 HT - 250.00 HT
Precio : 300.00 € TTC (x1)

Rondelle de boulon de vilebrequin (S14 2.5L)- 17.71 HT
Precio : 21.18 € TTC (x1)

Tuyau de remplissage de D.A - 35.00 HT
Precio : 41.86 € TTC (x1)

Amortisseurs Bilstein (diam. 41) NR 2 x 468.00 HT - 936.00 HT
Precio : 1123.20 € TTC (x1)

Kit boulons / joints pour flexible HP D.A. - 22.00 € HT
Precio : 26.40 € TTC (x1)

Réglage souplesse direction - 258.00 € HT
Precio : 309.60 € TTC (x1)

Kit pompe à carburant / capteur niveau 4 bars - 286.03 HT
Precio : 343.24 € TTC (x2)

Potentiomètre pour guillotine S14 et S42 = 395.00 HT
Precio : 474.00 € TTC (x1)

Poulie de pompe à eau S42 légère - 28.50 HT
Precio : 34.09 € TTC (x2)

Boîte 6 séquentielle nue (26 Kg)- 8798.05 HT
Precio : 10557.66 € TTC (x1)
Boulons de bielle S42 suivant marque et modèle (prix sur demande de 19 à 30 euro)
Precio : 0.00 € TTC (x1)

Support Alu de capteur phasage S14- 58.00 HT
Precio : 69.37 € TTC (x1)

Jeu de segments 86.50mm - 4 x 47.00 = 188.00 HT
Precio : 225.60 € TTC (x1)

Fourche excentrée de fixation rotule sup AR amort. = 2 x 128.00 = 256.00 HT
Precio : 307.20 € TTC (x1)
Faisceau moteur Double rampe (8 injecteurs)
Precio : 1495.00 € TTC (x1)

Joint de culasse multi-feuille DS S42 Ep. 1.8mm Diam. 87mm (pour un RP sup. à 13)- 435.00 HT
Precio : 522.00 € TTC (x1)

Maître cylindre Alu (diamètre 22,20) double circuit sans assistance - 444.72 HT
Precio : 533.66 € TTC (x2)
Kit complet Evolutif avec faisceau, 8 injecteurs et accessoires (Magneti Marelli SRA-E)
Precio : 3827.20 € TTC (x1)

Demi train AV
Precio : 0.00 € TTC (x1)

Joint de Plaque AR de vilebrequin - 8.80 HT
Precio : 10.53 € TTC (x1)

Contacteur de bte sequentielle - 25.78 HT
Precio : 30.94 € TTC (x1)

Dérivateur huile S42 - 380.00€ HT
(Permettant de garder le montage de l'alternateur d'origine)
Precio : 456.00 € TTC (x1)

Connectique de communication pour boîtier SRA-E - 49.00 HT
Precio : 58.60 € TTC (x1)

Bielle courte en H - 279.26 HT
Precio : 335.11 € TTC (x1)

Lobro renforcé diam 108 ep. 32 = 252.00 HT (pièce)
Precio : 302.40 € TTC (x1)

Visco nu 8/88 % - 2578.74 HT
Precio : 3094.45 € TTC (x1)

Volant moteur léger pour embrayage diam. 184 - 649.67 HT
Precio : 777.00 € TTC (x1)
Collecteur inox = 757.00 € HT
Precio : 908.40 € TTC (x1)

Ensemble fiche Potentiomètre S14 - 23.50 HT
Precio : 28.20 € TTC (x1)

Kit freinage AV 345/32 étriers 4 pistons Brembo avec supports, plaquettes, fixations et boulonnerie - 1899.67 HT
Precio : 2272.00 € TTC (x2)

Kit alimentation essence pompe 6 bars - 1421.83 HT
Precio : 1706.20 € TTC (x1)

Récepteur embrayage (pour cloche S42) diamètre 22.20 - 75.00 HT
Precio : 89.70 € TTC (x1)
Kit supports et silentblocs échappement - 54.35 HT
Precio : 65.00 € TTC (x1)

Kit manchons de réglage hauteur ressorts - 220.00 HT
Precio : 264.00 € TTC (x1)

Double calle acier conique / plat de bras AR (coté roue) tirant et bras suspension = 4 x 22.00 = 88.00 HT
Precio : 105.60 € TTC (x1)

Durite AR de culasse - 11.71 HT
Precio : 14.00 € TTC (x1)

Double Interface adaptation S42 (pour boîte séquentielle 26kg)- 1203.27 HT
Precio : 1443.92 € TTC (x2)
Filtre à air Haute Performance (nettoyable)- - 53.51 HT
Precio : 64.00 € TTC (x2)

Support anti brouillard sur PC (look E92) 2 x 94.90 HT - 189.80 HT
Precio : 227.00 € TTC (x1)

Support capteur PMH S14
Precio : 179.40 € TTC (x1)

Boîte 6 séquentielle seule (37 Kg / rapports prédéfinis)- 12 209.03 HT
Precio : 14650.84 € TTC (x2)
Faisceau moteur Simple rampe (4 injecteurs)
Precio : 1291.68 € TTC (x1)

Combiné AR complet / base Bilstein = 2 x 747.00 = 1494.00 HT
Precio : 1792.80 € TTC (x1)

Kit 2 supports Alu de barre stabilisatrice AR - 69.40 HT
Precio : 83.00 € TTC (x1)

Kit jauge VDO (mano et jauge) - 185.00 HT
Precio : 222.00 € TTC (x1)
Butée Embrayage renforcée (non obligatoire mais fortement conseillée)- 98.30 HT
Precio : 117.57 € TTC (x1)

Boîte Séquentielle (26kg) complète avec cloche et interface S42 - 10451.32 HT
Precio : 12541.58 € TTC (x1)

Anodisation de nos pièces Alu Couleurs au choix : noir, bleu, rouge, orange (prix par pièce de 15 à 30 euros selon modèle)
Precio : 0.00 € TTC (x1)

Schéma boite 6 manuelle (pignonnerie)
Precio : 0.00 € TTC (x1)

Joint de queue de soupape S42 diam. 5 (prix unitaire) - 6.04 HT
Precio : 7.25 € TTC (x1)
Préparation berceau spéciale pour réception moteur S14 (support sur berceau)- 379.60 HT
Precio : 454.00 € TTC (x1)

Kit embout remplissage réservoir - 135.00 HT
Precio : 162.00 € TTC (x1)

Tube de bras SUP AR 25x254 - 5/8 filete D/G 5/8 en alu = 2 x 48.00 = 96.00 HT
Precio : 115.20 € TTC (x1)

Ventilo alternateur - 81.94 HT
Precio : 98.00 € TTC (x1)

Support fixation PC AR latéral côté droit look origine finition carbone - 85.00 € ht
Precio : 102.00 € TTC (x1)

Carter de distribution orig. - 289.02 HT
Precio : 346.82 € TTC (x1)

Pipe à eau GR.A (sans thermostat) = PLUS LIVRABLE
Precio : 0.00 € TTC (x1)

Guide ressort sur combiné diamètre 56 mm - 18.30 HT
Precio : 21.96 € TTC (x1)
Biellettes de barre stabilisatrice 2 x 83.61 HT - 167.22 HT
Precio : 239.00 € TTC (x1)

Kit transmission AR avec 2 cardans renforcés, cales et boulons - 949.83 HT
Precio : 1136.00 € TTC (x1)

Kit 10 Vis de culasse S14 - 58.90 HT
Precio : 70.68 € TTC (x1)

Joint Torique de pompe à eau - 6.50 HT
Precio : 7.77 € TTC (x1)

Couvercle de remplacement Thermostat - 437.00 HT
Precio : 522.65 € TTC (x1)

Cache de passage de roue INF D - 55.00 HT
Precio : 60.83 € TTC (x1)

Kit goujons supérieurs de pont = 37.63 HT
Precio : 45.16 € TTC (x1)
Barre Anti Rapprochement AV Alu Version Racing - 248.33 HT
Precio : 297.00 € TTC (x1)

Volant Moteur pour embrayage diam. 184 Moteur S42 (4.2 Kg)- 530.00 HT
Precio : 636.00 € TTC (x1)

Joint papier de couvercle thermostat - 5.70 HT
Precio : 6.82 € TTC (x1)

Vitre AV avec trappe polycarbonate - 95.00 € HT
Precio : 114.00 € TTC (x1)

Ventilateur diam 310 = 85.00 HT
Precio : 102.00 € TTC (x1)
OPTION : Faisceau de coupure (pour boîte 6 séquentielle)- 149.67 HT
Precio : 179.60 € TTC (x1)

Long bras de pince AR fusée orig S1 = 68.00 HT
Precio : 81.60 € TTC (x1)

Calle latérale de 3.41 à 3.49 (jaune/bleu/rouge) - 78.50 HT (prix unitaire)
Precio : 94.20 € TTC (x1)

Cloche de boîte pour adaptation moteur S42 (boîtes 26 kg)- 450.00 HT
Precio : 540.00 € TTC (x2)

Boîte à air Carbone type double injection sur guillotine ou papillon - 2500.00 HT
Precio : 2990.00 € TTC (x1)

Récepteur embrayage (pour cloche S14) Alu Diamètre 20,64 - 196.00 HT
Precio : 235.20 € TTC (x2)

Moyeu roulement AV - 243.80 HT prix unitaire
Precio : 292.56 € TTC (x1)
Bielle en H moteur S42 - 295.00 HT
Precio : 352.82 € TTC (x1)

Tableau de bord complet : plaque support instrumentation Alu, manomètres, voyants à partir de 630.00 € HT
Precio : 0.00 € TTC (x1)
Kit 10 boulons spéciaux (diamètre 14 et longueur 80)avec écrous pour montage avec élargisseurs 40 mm - 159.70 HT
Precio : 191.00 € TTC (x1)
Arceau à souder multipoints (24) diamètre 50 - 1149.67 HT
Precio : 1375.00 € TTC (x1)

Chape de biellette de direction côté crémaillère "rallye" = 120.00 HT
Precio : 144.00 € TTC (x1)

Supports Alu droit et gauche pour boîte séquentielle (26 kg) 2 x 120.00 HT - 240.00 HT
Precio : 287.04 € TTC (x1)
Pompe à huile de base OR - 293 HT
Precio : 352.82 € TTC (x1)

Support boitier injection "type prodrive" - 85.00 € HT
Precio : 102.00 € TTC (x1)

Rotules de pivot E46 renforcées diam 49 - 2 x 38.50 = 77.00 € ht
Precio : 92.40 € TTC (x2)

Kit soufflet tôle / cardan - 87.67 HT
Precio : 105.20 € TTC (x1)

Disque AR diam. 295 x 22 / 12 trous / entraxe 177.8 - 2 x 320.00 = 640.00 HT
Precio : 768.00 € TTC (x1)

Kit complet combiné AR
Precio : 0.00 € TTC (x2)
Kit évolution double rampe S42 - 679.77 HT
Precio : 813.00 € TTC (x2)

Pédale d'embrayage GR.A alu - 380.00 HT
Precio : 456.00 € TTC (x1)

Kit vis et écrous pour flector renforcé - 35.59 HT
Precio : 42.71 € TTC (x1)

Porte roulement zingué = + 30 € ht
Precio : 0.00 € TTC (x1)

Kit coussinets Téflon de support de barre stabilisatrice - 36.00 HT
Precio : 43.06 € TTC (x1)
Arbre de transmission complet - 779.26 HT
Precio : 935.11 € TTC (x1)

Emetteur de pression Ess. 0-10 bars / alarm. 2 bars / 10x100 - 95.00 HT
Precio : 114.00 € TTC (x1)

Tripode pour fabrication arbre de transmission - 150.00 HT
Precio : 180.00 € TTC (x1)
Vitre de malle AR Makrolon
Precio : 99.27 € TTC (x1)

Bras de triangle 2 x 340.00 = 680.00 HT
Precio : 816.00 € TTC (x1)

Disque métal fritté 4 patins diam. 240 = 283.00 HT
Precio : 339.60 € TTC (x1)
Arbre à cames ADM S42 314° 12.50 de levée - 680.00 HT
Precio : 813.28 € TTC (x1)
Pistons S14 93.90 de diamètre et 84.00 de course - 281.77 HT
Precio : 337.00 € TTC (x2)
Kit freinage diamètre 280/314
Precio : 0.00 € TTC (x1)

Boîte à air Carbone directe sur papillons - 1829.43€ HT
Precio : 2188.00 € TTC (x1)

Support fixation PC AR latéral côté droit look origine finition standard - 40 € ht
Precio : 48.00 € TTC (x1)

Pièces de remplacement silentbloc pompe D.A - 2 x 18.30 = 36.60 ht
Precio : 43.92 € TTC (x1)

Kit pattes support radiateur huile (4) pour rad.500/10 préformé - 98.00 ht
Precio : 117.60 € TTC (x1)
Courroie de DA S14 - 28.70 HT
Precio : 34.44 € TTC (x1)

Barre stab AR diam. 23 pour train Orig. (pour voie étroite)- 275.00 HT
Precio : 330.00 € TTC (x1)

Barre stab. AR Diam 20 (non réglable) - 257.02 HT
Precio : 308.42 € TTC (x1)

Biellette de barre stab réglable / rotule de diam 10 = 2 x 130.00 = 260.00 HT
Precio : 312.00 € TTC (x1)

Cale pied pilote carbone - 245.00 HT
Precio : 294.00 € TTC (x2)

Rotules grand angle spéciales 4 x 233.40 HT = 933.60 HT
Precio : 1120.32 € TTC (x1)

Bouchon AR de culasse S14 Acier troué, fileté - 15.00 HT
Precio : 17.94 € TTC (x1)
Liteau de support Gauche - 24.46 HT
Precio : 29.25 € TTC (x1)

Capteur d'allumage / cloche - 129.33 HT
Precio : 155.20 € TTC (x1)

Faisceau complet pour rampe led avec inter double - 38.40 € ht
Precio : 46.08 € TTC (x1)

Nécessaire de montage pont ALU : flasque, roulement, joints, cale - 654.00 HT
Precio : 784.80 € TTC (x1)
Afficheur / faisceau / coupure /contacteur (pour boîte 6 séquentielle)- 787.43 HT
Precio : 944.92 € TTC (x1)

Fourreaux de biellette de direction (mâle/femelle) 2 x 68.56 - 137.12 HT
Precio : 196.00 € TTC (x1)

Cache intérieur cloison (gros)- 256.50 HT
Precio : 307.80 € TTC (x1)

Potentiomètre inversé (pour boite SC 90-16)- 186.98 HT
Precio : 224.38 € TTC (x1)
Huile spéciale Visco 1.8 x 29.72 HT - 53.50 HT
Precio : 64.20 € TTC (x1)

Contacteur avec rehausse de bte sequentielle - 45.88 HT
Precio : 55.06 € TTC (x1)

Calle d'épaisseur entre rotule et le bras mécanosoudé = 4 x 2.50 = 10.00 HT
Precio : 12.00 € TTC (x1)

Kit entretoise de montage haut amort. AV anodisé - 2 x 78.10 = 156.20 HT
Precio : 187.44 € TTC (x2)
Ressort de soupape S14 (la pièce)- 54.35 HT
Precio : 65.00 € TTC (x2)

Excentreur de fixation amortisseur AR / caisse - 4 x 25.00 = 100.00
Precio : 120.00 € TTC (x1)

Chapeaux de ressort AV spéciaux - 2 x 50.00 HT - 100.00 HT
Precio : 120.00 € TTC (x1)

Bol de frein 12 T = 158.00 HT
Precio : 189.60 € TTC (x1)

Kit levier réglable -250 € ht
Precio : 300.00 € TTC (x1)
Moyeux AR avec écrous 2 x 99.92 HT - 199.84 HT
Precio : 239.00 € TTC (x1)
Chaîne de pompe à huile renforcée (S14)- 38.46 HT
Precio : 46.00 € TTC (x1)

Support acier noir (à visser ou à souder) - 55.00 € ht
Precio : 66.00 € TTC (x1)
Kit 4 optiques Xenon H1 , supports, ampoules... - 539.30 HT
Precio : 645.00 € TTC (x1)

Jauge huile S42 dégazée - 73.00 HT
Precio : 87.31 € TTC (x1)

Couronne 60-2 pour adaptation gestion S14 - 149.80 € HT
Precio : 179.76 € TTC (x1)

Cloche de boite nue brute 5.9 kg = 280.00 HT
Precio : 336.00 € TTC (x1)

Câble de réglage palommier de répartiteur mécanique 3/8me par 75 cm - 93.00 HT
Precio : 111.60 € TTC (x1)

Pompe de D.A. Préparée en E.ST - 297.66 HT
Precio : 356.00 € TTC (x1)

Plaque boîte à gants Carbone (non percée)- 38.00 HT
Precio : 45.60 € TTC (x1)

Kit complet réservoir alimentation d'essence dans la roue de secours (sur demande)
Precio : 0.00 € TTC (x1)
Modification autobloquant à 75 % - 1030.00 HT
Precio : 1231.88 € TTC (x1)

Silentblocs de chasse rigides excentrés (supports origines) 2 x 54.77 HT - 109.54 HT
Precio : 131.00 € TTC (x1)
Kit freinage AV étriers 4 pistons AP avec supports, bols, plaquettes et disques 330/32 - 2500.00 HT
Precio : 2990.00 € TTC (x1)

Tole d'embout lobro diam 108 = 24.84 HT (pièce)
Precio : 29.81 € TTC (x1)

Tulipe de nez de gros pont - 244.00 HT
Precio : 292.80 € TTC (x1)

Rotule côté roue = 196.20 HT
Precio : 235.44 € TTC (x1)

Frein à main complet - 189.80 HT
Precio : 227.76 € TTC (x1)

Pompe alimentation degazeur 150l/h - 134.86 € HT
Precio : 161.83 € TTC (x1)

Plaque haute centrale Carbone (non percée)- 17.95 HT
Precio : 21.54 € TTC (x1)

Fourche courte AR de tirant AR = 2 x 96.50 = 193.00 HT
Precio : 231.60 € TTC (x1)

Pion centreur de cardan - 9.80 HT pièce
Precio : 11.76 € TTC (x1)

Double entretoise alu de rotule (coté berceau) du bras et du tirant (27 mm)= 4 x 18.40 = 73.60 HT
Precio : 88.32 € TTC (x1)
Supports à souder 2 x 14.63 HT - 29.26 HT
Precio : 35.00 € TTC (x1)

Soufflet diam. 108 6T = 48.52 HT (pièce)
Precio : 58.22 € TTC (x1)

Taillage des "V" à 120° des plateaux de serrage origine + traitement "cémentation +TR Prof. visée : 0.7 à 0.9" - 2 x 268.00 = 536.00.00 HT
Precio : 643.20 € TTC (x1)

Kit silentblocs chasse renforcés - 91.47 HT
Precio : 109.40 € TTC (x1)

Moyeu AV type Prodrive zingué + 30€ HT
Precio : 0.00 € TTC (x1)

Main alu Prodrive (Droite ou Gauche) - 2 x 481.00 = 962.00 HT
Precio : 1154.40 € TTC (x1)

Support Alu pour fixation disjoncteurs et coupe circuit - 95.00 HT
Precio : 114.00 € TTC (x1)

Réservoir 65 litres équipé (Vaison) - 3587.00 € ht
Precio : 4304.40 € TTC (x1)

Maitre Cylindre AP AR - 218.00 HT (photo non contractuelle)
Precio : 261.60 € TTC (x2)
Rotules de direction spéciales 2 x 58.38 HT - 116.76 HT
Precio : 167.00 € TTC (x1)

Pochette de joints pour boite 6 Sadev = 142.00 HT
Precio : 170.40 € TTC (x1)

Ressort compensateur de mouvement - 2 x 35.00 = 70.00 HT
Precio : 84.00 € TTC (x1)

Filtre à air GrA - 57.51€ HT
Precio : 69.01 € TTC (x1)

Supports de boite rigide - 2 x 80.00 = 160.00 HT
Precio : 192.00 € TTC (x1)

Rotules de berceau (petite tête pour passage fourche berceau) 2 x 268.33 = 536.66 HT
Precio : 643.99 € TTC (x1)
Arbre de transmission série 1 - 792.00 €
Precio : 950.40 € TTC (x1)
Coussinets de bielle Motorsport (prix unitaire)- 42.90 HT
Precio : 51.31 € TTC (x1)
Amortisseurs de base spécifiques sur rotule - 2 x 324.00 HT - 648.00 HT
Precio : 777.60 € TTC (x1)

Disque de friction ZF (diam. 103,75mm) (pour autobloquant et glissement limité) Gros Pont - 98.00 HT (PLUS LIVRABLE)
Precio : 117.21 € TTC (x1)

Silentblocs de boîte renforcé - 2 x 53.40 = 106.80 HT
Precio : 135.19 € TTC (x1)
Silentbloc AR renforcé de pont - 34.28 HT
Precio : 41.00 € TTC (x1)
Pastille de réglage de soupape MOTORSPORT diam 5 longue Echappement épaisseur 1.20 à 3 mm - 18.80 HT
Precio : 22.48 € TTC (x1)
Ailes AR complètes Droite et Gauche Polyester (avec haut) 2 x 217.39 HT - 434.78 HT
Precio : 520.00 € TTC (x1)

Bielle longue moteur S14 en H - 289.30 HT
Precio : 347.16 € TTC (x1)

Adaptation couronne 60 - 2 sur Damper (moteur S14)- 229.93 HT
Precio : 275.00 € TTC (x1)

Régulateur de pression ess. réglable → 6.20 bars = 253.66 HT
Precio : 304.39 € TTC (x2)

Tube mécano-soudé = 78.00 HT
Precio : 93.60 € TTC (x1)

Support fixation PC AR latéral côté gauche look origine finition standard = 40.00 € ht
Precio : 48.00 € TTC (x1)

Thermostat Moteur S42 - 17.48 HT
Precio : 20.91 € TTC (x1)
Pare brise orig. "teinté vert" - 675.90 ht (pour info)
Precio : 811.08 € TTC (x1)

Disque de friction DS (diam. 103,75mm /2.5) (pour autobloquant et glissement limité) Gros Pont - 127 € HT
Precio : 152.40 € TTC (x1)
Bougies Racing (SP moteur S14) Prix unitaire de 27.30 à 54.20 euro suivant modèle
Precio : 27.30 € TTC (x1)

Kit remplacement silentbloc de chasse par rotule prisonniere sur bras d'origine -
Precio : 0.00 € TTC (x1)

Demi-arbre trans. pour boîte seq. 37 kg et pour moteur S42 - 479.93 HT
Precio : 574.00 € TTC (x1)

Carter de gros pont ALU type 210 (6.4 kg) - 2399.26 HT
Precio : 2879.11 € TTC (x1)

Traverse alu support de boite type Prodrive (entraxe rail 33 ou 32.5) - 832.00 HT
Precio : 998.40 € TTC (x1)

Barreau renforcé GR.A pour cardan 41/5/46.5 = 385.00 € ht
Precio : 462.00 € TTC (x1)

Ligne intermediaire AR - 585.00 € ht
Precio : 702.00 € TTC (x1)

Kit support barre Stab AR = 2 x 43.00 = 86.00 HT
Precio : 103.20 € TTC (x1)

Poulie crantée de tendeur de D.A - 8.50 HT
Precio : 10.20 € TTC (x1)

Support moteur Gauche mécanosoudé (S42) = 275.00 HT
Precio : 330.00 € TTC (x1)

Cale créneaux ZF (pour autobloquant et glissement limité) Petit Pont - 56.50 HT
Precio : 67.57 € TTC (x1)
Pompe à essence immergée 6 Bar - 279.26 HT
Precio : 334.00 € TTC (x1)

Jauge tube 225mm VEDEO - 97.00 HT
Precio : 116.40 € TTC (x1)

Kit tuyau de guidage et jauge Moteur S14 - 55.00 HT
Precio : 66.00 € TTC (x1)
Optimisation du boîtier électronique ( avec suppression du limiteur de vitesse)
Precio : 765.00 € TTC (x1)

Pont complet GP ALU avec Visco 8/88 et couple 5.71 (34.2 Kg)- 6395.00 HT
Precio : 7674.00 € TTC (x1)

Kit 4 cornets droits Carbone - 480.02 HT
Precio : 574.10 € TTC (x1)

Kit manchons de réglage hauteur ressorts - 220.00 HT
Precio : 264.00 € TTC (x1)

Couvre réservoir en alu avec regard plexis - 225.00 ht
Precio : 270.00 € TTC (x1)

Copie pare choc AV polyesther (avec attaches intérieures) - 495.00 HT
Precio : 594.00 € TTC (x1)
Roulements renforcés - 2 x 87.79 HT - 175.58 HT
Precio : 210.00 € TTC (x1)

Joint de culasse Metalloplastique M42 Ep. 1.9mm Diam. 87mm (pour un RP inf. à 13)- 291.27 HT
Precio : 349.52 € TTC (x1)

Rotule grand angle de bras côté roue AV de 3/4 AD (gros contre écrou)= 2 x 178.01 = 356.02 HT
Precio : 427.22 € TTC (x1)

silencieux AR latéral gros modèle 105 dB - 434.78€ HT
Precio : 520.00 € TTC (x2)

Boulons de bielle Spéciaux - 12 x 33.44 HT - 401.34 HT
Precio : 480.00 € TTC (x1)

Tube de bras directionnel AV de train AR fileté D/G 5/8 alu 25x215x5/8 = 2 x 46.00 = 92.00 HT
Precio : 110.40 € TTC (x1)
Barre anti-rapprochement AV Inox - 163.00 HT
Precio : 195.60 € TTC (x1)
Modification du faisceau moteur origine en GrA
Precio : 956.00 € TTC (x1)
Tulipe Gauche de sortie de pont (obligatoire avec changement de pont)- 149.67 HT
Precio : 179.00 € TTC (x1)

Silencieux AR double sortie OO diamètre 85 mm 100 % Inox - 567.73 HT
Precio : 679.00 € TTC (x1)

Roulement de butée diam d'encastrement 40 - 142.00 € ht
Precio : 170.40 € TTC (x1)

Boite 6 Manuelle à Crabots DS (consigne 1200 euros carter Getrag 265) livrée sans cloche - 5980.00 HT
Precio : 7152.08 € TTC (x1)

Kit platine levier de vitesse complet (à fixer sur tunnel) - 258.00 HT
Precio : 309.60 € TTC (x1)

Cales inférieures Alu amortisseur - 35.00 HT
Precio : 41.86 € TTC (x1)

Joints toriques latéraux de pipe à eau S42 (prix unitaire)- 2.32 HT
Precio : 2.77 € TTC (x1)

Barre stab AR diam. 20 pour train Orig.(pour voie étroite)= 262.00 HT
Precio : 314.40 € TTC (x1)

Kit câble de verrouillage de M.AR équipé pour boite légère SCL82.17 - 123.55 HT
Precio : 148.26 € TTC (x1)
Jauge à huile S14 - 73.00 HT
Precio : 87.31 € TTC (x1)

Lobro diam 108 ep.32 standard = 115.00 HT (pièce)
Precio : 138.00 € TTC (x1)

Tableau de bord floqué, echg std - 350.00 ht
Precio : 420.00 € TTC (x1)

Patte à support de pont droit à souder (le kit) - 25.00 HT
Precio : 30.00 € TTC (x1)

Tirants AR inférieurs réglables en carrossage et voie (-1.00 à +3.00 mm) 2 x 179.97 HT - 359.94 HT
Precio : 430.50 € TTC (x1)

Kit support de levier boite 5 Prodrive (en fabrication)
Precio : 0.00 € TTC (x1)

Rotule de triangle renforcé de berceau - 45.00 HT (prix unit.)
Precio : 54.00 € TTC (x1)

Patte AR support pompe D.A - 25.80 € ht
Precio : 30.96 € TTC (x1)

Prise d'air AV Gr A Carbone - 145.00 € HT
Precio : 174.00 € TTC (x1)

Boite tampon = 137.53 HT
Precio : 165.04 € TTC (x1)

Poulie pompe à eau courroie plate S14 - 259.93 HT
Precio : 311.92 € TTC (x1)

Préparation du berceau - 1579.43 HT
Precio : 1895.39 € TTC (x1)

Joints de haut d'amortisseur (diamètre 41) 2 x 29.17 HT - 58.34 HT
Precio : 70.01 € TTC (x1)

Biellettes de direction Longues complètes 2 x 199.83 HT - 399.66 HT
Precio : 478.00 € TTC (x1)

Couple 4.11 - 980.00 HT
Precio : 1176.00 € TTC (x1)

Bas de caisse Droit Polyester - 143.71 HT
Precio : 172.45 € TTC (x1)

Fusées spéciales EVO 1/2/3 2 x 390.00 HT - 780.00 HT
Precio : 932.88 € TTC (x1)

Lobro renforcé diam 108 ep. 40 28c = 267.00 HT (pièce)
Precio : 320.40 € TTC (x1)
Pastille de réglage de soupape MOTORSPORT diam 6 ou 7 épaisseur 1.20 à 3 mm - 16.80 HT
Precio : 22.48 € TTC (x1)

Tulipe courte pour boîte SADEV - 182.00 HT
Precio : 218.40 € TTC (x1)

Cale créneaux ZF (pour autobloquant et glissement limité) Gros Pont - 68.80 HT
Precio : 82.28 € TTC (x1)
Total : 196526.64 € TTC