
Amortisseurs AR Nu C2P - 2 x 883.40 HT - 1766.80 HT
Precio : 2120.16 € TTC (x1)
Vilebrequin Origine (13.720 kg)- 1182.27 HT
Precio : 1414.00 € TTC (x1)

Biellette barre stab AR série 1 avec boulonnerie et entretoise - 85.00 HT
Precio : 102.00 € TTC (x1)

Attache pot échappement en inox à souder - 18.00 HT
Precio : 21.60 € TTC (x1)

Vilebrequin moteur S14/7 course 77.40 EVO2 (13.640 kg)- 2680.00 HT
Precio : 3205.28 € TTC (x1)

Tuyau de remplissage de D.A - 35.00 HT
Precio : 41.86 € TTC (x1)

Bouchon AR de culasse Alu S14 - 39.46 HT
Precio : 47.35 € TTC (x1)
Phare AV Gauche léger 2kg130 avec ampoules - 303.00 HT
Precio : 362.39 € TTC (x1)

Ressorts spécifiques uniformes - 2 x 97.83 HT - 195.66 HT
Precio : 234.79 € TTC (x1)

Rallonges de crémaillère voie large (à monter quand on conserve les biellettes origine) 2 x 56.86 HT - 113.72 HT
Precio : 136.00 € TTC (x1)
Couple 20 % plus court - 759.20 HT
Precio : 908.00 € TTC (x1)

Fourche longue AV de tirant AR = 2 x 107.80 = 215.60 HT
Precio : 258.72 € TTC (x1)

Rotule SP encastrable / berceau / bras AV trou de 12 = 2 x 85.00 = 170.00 HT
Precio : 204.00 € TTC (x1)

Vilebrequin moteur S14 course 72.60 Evo 1 - 2680.00 HT
Precio : 3216.00 € TTC (x1)
Ressorts AR 2 x 129.60 HT - 259.20 HT
Precio : 311.04 € TTC (x1)

Poussoirs Motorsport 6.10 / 42 grammes (prix unitaire) - 117.00 HT
Precio : 139.93 € TTC (x1)

Couple conique 4.10 (pour 3.2L) 210mm - 1352.00 HT
Precio : 1616.99 € TTC (x1)

Support assymétrique à souder sur bout de longeron - 2 x 54.00 = 108.00 HT
Precio : 129.60 € TTC (x1)

Moyeu de volant - 97.83 HT
Precio : 117.00 € TTC (x1)

Chapeaux de ressort (diam 60)- 2 x 49.75 HT - 99.50 HT
Precio : 119.40 € TTC (x1)

Disque intérieur pour embrayage bi ou tri-disques - 183.33 HT
Precio : 220.00 € TTC (x1)

Culasse neuve S14 préparée avec soupapes queue diam.6, ressorts, coupelles "montés" - 8200.00 HT
Precio : 9840.00 € TTC (x1)

Tuyau de conduit d'huile au radiateur (court) - 129.00 HT
Precio : 154.80 € TTC (x1)

Couple conique 4.75 (pour 3.2L) (210mm)- 1580.00 HT
Precio : 1896.00 € TTC (x1)
Kit entretoises amortisseur - 79.43 HT
Precio : 95.32 € TTC (x1)

Double entretoise alu de rotule (coté berceau) du bras et du tirant (27 mm)= 4 x 18.40 = 73.60 HT
Precio : 88.32 € TTC (x1)

Moyeu AR pour fusée AR Orig. / gros cardan = 2 x 185.00 = 370.00 HT
Precio : 444.00 € TTC (x1)

Tige de tirant train AR (avec écrou) = 2 x 44.20 = 88.40 HT
Precio : 106.08 € TTC (x1)

Fourche courte AR de tirant AR = 2 x 96.50 = 193.00 HT
Precio : 231.60 € TTC (x1)
Cloche de boîte pour adaptation moteur S42 - 679.77 HT
Precio : 813.00 € TTC (x1)

Amortisseur AR alu Bilstein nu = 2 x 365.00 = 730.00 HT
Precio : 876.00 € TTC (x1)

Support anti-brouillard Droit sur PC Polyester - 85.20 HT
Precio : 102.24 € TTC (x1)

Bols de disque EVO 2 (12T / 240)- 2 x 311.99 = 623.98 HT
Precio : 748.78 € TTC (x1)
Piston complet GrA (93.73/79/85)- 384.62 HT
Precio : 460.00 € TTC (x1)

Levier complet pour boîte DS avec platine et blocage - 385.00 HT
Precio : 462.00 € TTC (x1)

Support alternateur / D.A S42 - 87.75 HT
Precio : 105.30 € TTC (x1)

Coussinets de bielle Tri-métal Motorsport Diamètre 48 Moteur S14 (Prix unitaire)- 38.50 HT
Precio : 46.20 € TTC (x1)

Conduit air flexible entre boîte et Guide AV - 37.63 HT
Precio : 45.00 € TTC (x1)

Support étrier AR 4P AP / fusée orig. S1 = 2 x 128.00 = 256.00 HT
Precio : 307.20 € TTC (x1)

Coussinets de bielle Motorsport Diamètre 45 Moteur S14/7 (Prix unitaire)- 49.90 HT
Precio : 59.88 € TTC (x1)
Kit adaptation coupure sur boîte séquentielle
Precio : 267.00 € TTC (x1)

Cale créneaux DS (de 1.20 à 2.8 de 0.05 en 0.05) pour autobloquant et glissement limité - Petit Pont - 48.30 HT
Precio : 57.77 € TTC (x1)
Kit complet tuyaux aérokip - 179.77 HT
Precio : 215.00 € TTC (x2)

Couple conique 3.72 (pour 3.2L) 210mm - 1480.00 HT
Precio : 1170.08 € TTC (x1)

Disque embrayage organique renforcé - 391.00 HT
Precio : 469.20 € TTC (x1)

Barre stabilisatrice réglable (diamètre 30 ou 32) - 535.00 HT
Precio : 639.86 € TTC (x1)

Carter de gros pont ALU type 210 (6.4 kg) - 2399.26 HT
Precio : 2879.11 € TTC (x1)
Cadre de ventilateur électrique - 75.00 HT
Precio : 90.00 € TTC (x1)
Kit supports de siège SP Co-Pilote - 149.67 HT
Precio : 179.00 € TTC (x1)

Tendeur alternateur - 61.50 HT
Precio : 73.80 € TTC (x1)

Calle d'épaisseur entre rotule et le bras mécanosoudé = 4 x 2.50 = 10.00 HT
Precio : 12.00 € TTC (x1)

Pont complet GP ALU avec Visco 8/88 et couple 5.71 (34.2 Kg)- 6395.00 HT
Precio : 7674.00 € TTC (x1)

Coussinets de bielle Tri-métal Motorsport (prix pièce) - 42.90 HT
Precio : 51.31 € TTC (x1)

Fusée spéciales 2 x 380 HT - 760.00 HT
Precio : 908.96 € TTC (x1)
Rotules supérieures - 2 x 64.38 HT - 128.76 HT
Precio : 154.51 € TTC (x1)

Potentiomètre papillon (S42) - 75.00 HT
Precio : 90.00 € TTC (x2)

Barre stab AR diam. 20 pour train Orig.(pour voie étroite)= 262.00 HT
Precio : 314.40 € TTC (x1)

Joint de porte ultra léger sans armature métallique (L 4.10) - 82.00 HT
Precio : 98.40 € TTC (x1)

Barre anti-rapprochement AV Alu - 219.90 HT
Precio : 263.88 € TTC (x1)

Mécanisme embrayage diamètre 184 (bi-disques)- 794.00 HT
Precio : 952.80 € TTC (x1)

Kit 16 ressorts de soupapes + coupelles supérieures Titane et coupelles inférieures (Moteur S14) - 691.47 HT
Precio : 829.76 € TTC (x2)

Rampe injecteur complète (tube inj. / support anneau) = 906.16 HT
Precio : 0.00 € TTC (x1)

Pompe à essence HP 6,5 BAR - 291.63 HT
Precio : 349.96 € TTC (x1)

Support de Doigt Rotor S14
Precio : 51.43 € TTC (x1)

Triangles renforcés usinés diam.20 - 2 x 382.00 = 764.00 € ht
Precio : 916.80 € TTC (x1)

Tulipe de nez de gros pont - 244.00 HT
Precio : 292.80 € TTC (x2)

Berceau AR de base - 468.54 HT
Precio : 562.25 € TTC (x1)

Cale butée embrayage Hydraulique 5mm - 40.00 HT
Precio : 47.84 € TTC (x1)
Support batterie Alu - 50.00 HT
Precio : 59.80 € TTC (x1)

Coupelles longues 2 x 79.85 - 159.70 HT
Precio : 191.64 € TTC (x1)

Phase 1 en 1960 cc3 / bloc M42 (240 CV) : bloc réalésé, 4 bielles style OR., 4 pistons 86.40, vilo 83.5, kit coussinets et volant moteur - 4500.00 HT
Precio : 5400.00 € TTC (x1)

Culasse neuve S14 préparée avec soupapes queue diam.7, ressorts, coupelles "montés" - 6100.00 HT
Precio : 7320.00 € TTC (x1)

Lobro renforcé diam 108 ep. 32 = 252.00 HT (pièce)
Precio : 302.40 € TTC (x1)

Filtre à essence - 35.80 HT
Precio : 42.96 € TTC (x1)

Plaque support cable accelerateur = 42.00 HT
Precio : 50.40 € TTC (x1)

Kit 12 boulons de bol fixation disque (long 22 sous tête) = 45.36 HT
Precio : 54.43 € TTC (x1)

Rotule de berceau du bras inf mecano soudé diam.14 = 2 x 65.00 = 130.00 HT
Precio : 156.00 € TTC (x1)

Potentiomètre, souplesse direction assistée - 45.00 HT
Precio : 54.00 € TTC (x1)
Kit freinage AV étriers 4 pistons AP avec supports, bols, plaquettes et disques 330/32 - 2500.00 HT
Precio : 2990.00 € TTC (x1)
Usinage triangles AV (diamètre 20) pour supports de chasse 2 x 94.80 HT - 189.60 HT
Precio : 227.52 € TTC (x1)

Récepteur embrayage (pour cloche S42) diamètre 20.64 - 95.00 HT
Precio : 113.62 € TTC (x1)

Amortisseurs Bilstein Alu AR - 2 x 345.74 HT - 691.48 HT
Precio : 829.78 € TTC (x1)
Eprom Gr A adaptée
Precio : 574.00 € TTC (x1)

Kit support barre Stab AR = 2 x 43.00 = 86.00 HT
Precio : 103.20 € TTC (x1)

Tole d'embout lobro diam 108 = 24.84 HT (pièce)
Precio : 29.81 € TTC (x2)

Kit frein AR complet avec disques (312 Lisses), bols et fixations, étriers AP 4 pistons, jeu de plaquettes
Precio : 0.00 € TTC (x1)

Injecteur Petit débit pour 1ère rampe (prix unitaire)
Precio : 125.58 € TTC (x1)

Guide ressort sur combiné diamètre 56 mm - 18.30 HT
Precio : 21.96 € TTC (x1)

Support afficheur vitesse carbone mat = 58.00HT
Precio : 69.60 € TTC (x1)

Barre stab AR diam. 23 pour train Orig. (pour voie étroite)- 275.00 HT
Precio : 330.00 € TTC (x1)
Kit suspensions Bilstein complet filetés, tarage spécifique - 2580.00 HT
Precio : 3096.00 € TTC (x1)

Kit des 2 supports Alu de barre stabilisatrice avec boulonnerie - 82 HT
Precio : 98.40 € TTC (x1)
Modif fusées AR pour la pince générale = 2 x 130.00 = 260.00 HT
Precio : 312.00 € TTC (x1)
Total : 75430.22 € TTC