
Traverse support de PC AV orig - 481.35 ht (PAS DE DISPO NI DELAI)
Precio : 577.62 € TTC (x1)

Faisceau rampe led bouton simple - 31.00 € ht
Precio : 37.20 € TTC (x1)

Tube de bras directionnel AV de train AR fileté D/G 5/8 alu 25x215x5/8 = 2 x 46.00 = 92.00 HT
Precio : 110.40 € TTC (x1)

Joint étanchéité entre radiateurs - 14.21 HT
Precio : 17.00 € TTC (x2)

Entretoise pour adaptation pipe sur moteur S42 - 349.00 HT
Precio : 418.80 € TTC (x1)

Traverse de boite séquentielle 26 kg Moteur S42 - 280.00 HT
Precio : 336.00 € TTC (x2)

Rondelle de boulon de vilebrequin (S14 2.5L)- 17.71 HT
Precio : 21.18 € TTC (x1)
Courroie de D.A. S42 sans tendeur - 48.36 HT
Precio : 58.03 € TTC (x1)

Collecteur Gros diamètre 2 x 63.5 (à monter en kit avec Sil. AV Cata. métal ou Tube AV Sup. Cata) - 2462.00 HT
Precio : 2954.40 € TTC (x1)
Boîte à air Carbone DELAGE Sport (gain avec programmation boîtier
25 CV) montage gratuit dans nos ateliers - 1829.43 HT
Precio : 2188.00 € TTC (x1)

Pipe admission S42 / 4 papillons - 982.44 HT
Precio : 1175.00 € TTC (x1)

Supports latéraux Droit et Gauche pour gros pont 2 x 130.00 HT - 260.00 HT
Precio : 310.96 € TTC (x1)

Usinage poulie réglable = 45.00 HT (P.U.)
Precio : 54.00 € TTC (x1)
Ressorts AV - 2 x 129.60 HT - 259.20 HT
Precio : 310.00 € TTC (x1)

Durite recyclage huile de reniflar = 35.21 HT
Precio : 42.25 € TTC (x1)

Pont complet GP Fonte avec Visco 8/88 et couple 5.71 (44.5 kg)- 4979.00 HT
Precio : 5974.80 € TTC (x1)

Support Alu droit et gauche pour boîte séquentielle 2 x 49.75 HT - 99.50 HT
Precio : 119.00 € TTC (x1)

Kit filtre régulation essence complet mono tuyau 5.2 bars = 443.33 HT
Precio : 532.00 € TTC (x1)

Filtre à air double cône SP boîte à air DELAGE Sport - 99.50 HT
Precio : 119.00 € TTC (x1)

Bols de disque auto-centreurs (fins) 2 x 210.28 HT - 420.56 HT
Precio : 503.00 € TTC (x1)

Bouchon de vase expansion Alu - 22.00 HT
Precio : 26.31 € TTC (x1)

Sonde 3 voies déclenchement ventilo refroidissement eau - 49.50 HT
Precio : 59.40 € TTC (x1)

Faisceau complet pour rampe led avec inter double - 38.40 € ht
Precio : 46.08 € TTC (x1)

Afficheur (pour boîte 6 séquentielle)- 593.00 HT
Precio : 709.23 € TTC (x1)

Bols de disque EVO 2 (12T / 240)- 2 x 311.99 = 623.98 HT
Precio : 748.78 € TTC (x1)

Poulie pompe à eau courroie plate S14 - 259.93 HT
Precio : 311.92 € TTC (x1)
Ressorts Rallye, Côte, Circuit - 2 x 129.60 HT - 259.20 HT
Precio : 311.04 € TTC (x2)

Tripode pour fabrication arbre de transmission - 150.00 HT
Precio : 180.00 € TTC (x1)

Pipe à eau GR.A (sans thermostat) = PLUS LIVRABLE
Precio : 0.00 € TTC (x1)

Pédale accélérateur Carbone avec boulonnerie, rotule et support - 299.00 HT
Precio : 358.80 € TTC (x1)

Baguette de jonction pavillon custode M3 - 135.00 HT
Precio : 162.00 € TTC (x1)

Support rail de distribution S14 - 48.50 HT
Precio : 58.01 € TTC (x1)

Coussinets de bielle Tri-métal Motorsport Diamètre 48 Moteur S14 (Prix unitaire)- 38.50 HT
Precio : 46.20 € TTC (x2)

Kit goujons supérieurs de pont = 37.63 HT
Precio : 45.16 € TTC (x1)

Liteau à coussinet d'echappement S42 - 1089.00 HT (dispo. en date du 13/02/2017)
Precio : 1306.80 € TTC (x1)
Kit boulonnerie d'amortisseur - 19.23 HT
Precio : 23.08 € TTC (x1)

Passages de roue AV plastique - 2 x 85.71 = 171.42 ht
Precio : 205.70 € TTC (x1)
Volant moteur BMW M3 E30 S14 184mm cible 60-2 dents = 640.00 € ht
Precio : 768.00 € TTC (x1)

Joint Carter / bloc (Moteur S14)- 16.19 HT
Precio : 19.36 € TTC (x1)

Plaque fermeture VM S14- 45.00 € HT
Precio : 54.00 € TTC (x1)

Lobro diam 108 ep.32 standard = 115.00 HT (pièce)
Precio : 138.00 € TTC (x2)

Support de barre Stab AV / jambe Proflex Bilstein - 2 x 95.00 HT - 190.00 HT
Precio : 228.00 € TTC (x2)
OPTION : Faisceau de coupure (pour boîte 6 séquentielle)- 149.67 HT
Precio : 179.60 € TTC (x1)

Vilebrequin moteur S42 course 85 EVO1 (13.070 kg)- 2670.00 HT
Precio : 3204.00 € TTC (x1)

Disques spéciaux Percés (diamètre 312) 2 x 345.00 = 690.00 HT
Precio : 828.00 € TTC (x1)
ECHAPPEMENT SPORT : Silencieux AR Inox avec 2 x 2 sorties diamètre 76 mm - 1265.05 HT
Precio : 1513.00 € TTC (x1)

Pompe à huile GrA (diamètre 18) - 593.00 HT
Precio : 711.60 € TTC (x1)

Support moteur Gauche mécanosoudé (S42) = 275.00 HT
Precio : 330.00 € TTC (x1)

Bielle renforcée forgée en H Lg 142.275, axe diamètre 21, pied 53 (prix unitaire)- 251.67 HT
Precio : 301.00 € TTC (x1)

Goujons de maintien de traverse AR - 2 x 43.83 = 87.66 HT
Precio : 105.19 € TTC (x1)

Lobro diam. 108 ep.40 rainuré = 123.33 HT (pièce)
Precio : 148.00 € TTC (x1)

Pompe à Huile de base Orig. - 364.00 € HT
Precio : 436.80 € TTC (x1)

Biellettes de barre Stab AV nues - 2 x 107.00 = 214.00 HT
Precio : 256.80 € TTC (x1)

Poulie A.A.C ADM - 168.74 HT
Precio : 202.49 € TTC (x1)
Arbres à cames 290°/280° 12,50 de levée 2 x 789.72 HT - 1579.44 HT
Precio : 1889.00 € TTC (x1)

Préparation du Carter huile Alu Grande capacité pour moteur S42 - 480.00 HT
Precio : 574.08 € TTC (x1)

Disque de friction DS (diamètre 88 / 23C / 2 mm) pour autobloquant et glissement limité - Petit Pont - 68.20 HT
Precio : 81.84 € TTC (x1)

Plaque compteur Carbone (non percée)- 25.00 HT
Precio : 30.00 € TTC (x1)

Rotule SP encastrable / berceau / bras AV trou de 12 = 2 x 85.00 = 170.00 HT
Precio : 204.00 € TTC (x1)

Récepteur embrayage (pour cloche S42) diamètre 22.20 - 75.00 HT
Precio : 89.70 € TTC (x1)

Nécessaire de montage pont ALU : flasque, roulement, joints, cale - 654.00 HT
Precio : 784.80 € TTC (x1)

Cale créneaux DS (de 1.20 à 2.8 de 0.05 en 0.05) pour autobloquant et glissement limité - Petit Pont - 48.30 HT
Precio : 57.77 € TTC (x1)
Phase 4 : -> 290 CV 9400 tr/m : bloc S14/7 chemisé 90.70, 4 pistons 90.62, vilo Super T double graissage, bielles en H et coussinets spéciaux tri-métal - 10 500.00 HT
Precio : 12600.00 € TTC (x1)

Double Interface adaptation S14 (pour boîte séquentielle 26kg) - 1103.27 HT
Precio : 1323.92 € TTC (x1)
Circlips de roulement 2 x 5.80 HT - 11.60 HT
Precio : 13.88 € TTC (x1)

Coussinets de bielle Tri-métal Motorsport (prix pièce) - 42.90 HT
Precio : 51.31 € TTC (x1)

Support guide poussoir Moteur S42 (prix unitaire)- 62.00 HT
Precio : 74.15 € TTC (x1)

Couple conique 4.75 (pour 3.2L) (210mm)- 1580.00 HT
Precio : 1896.00 € TTC (x1)

Protection de plancher intégral en kevlar/ carbone - 2 x 420 = 840.00 € ht
Precio : 1008.00 € TTC (x1)

Soufflet int de cardan = 38.50 HT
Precio : 46.20 € TTC (x1)

Durite de remplissage (S14 et S42)- 31.56 HT
Precio : 37.75 € TTC (x1)

Photo train AR monté
Precio : 0.00 € TTC (x2)

Biellettes complètes (avec boulonnerie et entretoises) de barre Stab AV réglables - 2 x 143.00 = 286.00 HT
Precio : 343.20 € TTC (x1)

Taillage des "V" à 120° des plateaux de serrage origine + traitement "cémentation +TR Prof. visée : 0.7 à 0.9" - 2 x 268.00 = 536.00.00 HT
Precio : 643.20 € TTC (x1)

Coupelle de ressort inf. ADM S42 (prix pièce) - 28.00 HT
Precio : 33.60 € TTC (x1)

Pare choc AV orig. - 1115.00 HT
Precio : 1338.00 € TTC (x2)

Poussoir Méca Ø 37,5 x 25 x 3,30 / 55 grammes(Prix unitaire)- 52.80 HT
Precio : 63.15 € TTC (x1)
Coupelles supérieures Titane de ressort de soupape 16 x 41.96 HT - 671.36 HT
Precio : 803.00 € TTC (x1)

Kit freinage AV complet : Etriers AP 6 pistons avec supports / disques diam. 355 / plaquettes HP / kit aérokip / loockeed - 2559.36 HT
Precio : 3061.00 € TTC (x1)

Poulie pompe eau à courroie plate - 229.93 HT
Precio : 275.00 € TTC (x1)

Bloc renforcé S14 diam. 93.40 (pas livrable pour le moment)
Precio : 0.00 € TTC (x1)

Support fixation PC AR latéral côté gauche look origine finition standard = 40.00 € ht
Precio : 48.00 € TTC (x1)

Coussinets de bielle Motorsport Diamètre 45 V96 S42 (Prix unitaire)- 42.90 HT
Precio : 51.31 € TTC (x1)
Disque embrayage métal fritté rigide - 343.00 HT
Precio : 411.60 € TTC (x1)
Arbre à cames S14 - 312 ° levée 12.70 (prix unitaire)- 780.02 HT
Precio : 932.90 € TTC (x1)

Copie pare choc AV polyesther (avec attaches intérieures) - 495.00 HT
Precio : 594.00 € TTC (x1)
Coupelle supérieure de ressort de soupape S14
(la pièce)- 37.63 HT
Precio : 45.00 € TTC (x1)

Rondelles Belleville ZF Petit Pont 2 x 34.70 HT - 69.40 HT
Precio : 83.00 € TTC (x1)

Photo train AR monté
Precio : 0.00 € TTC (x1)

Kit rondelles boulons de culasse - 94.00 HT
Precio : 112.80 € TTC (x1)

Kit entretoises, rondelles amortisseur - 45.25 HT
Precio : 54.30 € TTC (x1)

Alternateur 105 AMP GR.A avec ventilateur et poulie alu - 546.00 HT
Precio : 655.20 € TTC (x1)

Kit pattes support radiateur huile (4) pour rad.500/10 préformé - 98.00 ht
Precio : 117.60 € TTC (x1)
Modification autobloquant à 75 % - 1030.00 HT
Precio : 1231.88 € TTC (x1)
Pare brise orig. "teinté vert" - 675.90 ht (pour info)
Precio : 811.08 € TTC (x1)

Emetteur de pression huile 0-10 bars / alarm. 2 bars / 10x100 - 95.00 HT
Precio : 114.00 € TTC (x1)

Kit Durites Couleur Bleu (prévu pour thermostat) - 259.00 HT
Precio : 310.80 € TTC (x1)
Boîte 6 séquentielle complète avec levier et accessoires - 13 799.33 HT
Precio : 16504.00 € TTC (x1)

Volant Moteur pour embrayage diam. 184 Moteur S14 (4.2 Kg)- 530.00 HT
Precio : 636.00 € TTC (x1)

Ressorts de soupape ECH S42 pour soupape Titane (prix pièce)- 40.25 HT
Precio : 48.30 € TTC (x1)

Kit boulons de couple conique 14/150 - 88.00 HT
Precio : 105.60 € TTC (x1)

Cale créneaux ZF (pour autobloquant et glissement limité) Gros Pont - 68.80 HT
Precio : 82.28 € TTC (x2)

Barre stab AR diam. 20 pour train Orig.(pour voie étroite)= 262.00 HT
Precio : 314.40 € TTC (x1)

Portes moyeu usinés dans la masse 2 x 850.00 HT - 1700.00 HT
Precio : 2033.20 € TTC (x1)

Photo train AV Tour de Corse
Precio : 0.00 € TTC (x1)
Afficheur / faisceau / coupure /contacteur (pour boîte 6 séquentielle)- 787.43 HT
Precio : 944.92 € TTC (x1)

Support moteur Droit mécanosoudé pour collecteur court = 358.00 HT
Precio : 429.60 € TTC (x1)
Arbre à cames ECH S42 304° 12.60 de levée - 850.00 HT
Precio : 1016.60 € TTC (x1)

Clapets anti-déjaugeage huile - 3 x 18.00 HT - 54.00 HT
Precio : 64.58 € TTC (x1)

Couple conique 4.75 / 5.00 / 5.28 / 5.44 (pour 3.0L) 188mm - 1480.00 HT
Precio : 1770.08 € TTC (x1)

Pompe à eau S42 - 90.30 HT
Precio : 108.00 € TTC (x1)

Boîte 6 séquentielle nue (26 Kg)- 8798.05 HT
Precio : 10557.66 € TTC (x1)
Cardan Gauche renforcé (obligatoire avec changement de pont)- 549.33 HT
Precio : 657.00 € TTC (x1)

Ventilateur soufflant diam. 330 - 131.00 HT
Precio : 157.20 € TTC (x1)

Fourreaux de biellette de direction (mâle/mâle) 2 x 51.94 - 103.88 HT
Precio : 124.66 € TTC (x1)

Triangles Alu renforcés 3.5 cm de voie 2 x 288.00 HT - 576.00 HT
Precio : 691.20 € TTC (x1)
Modif pont autobloc 75% (modèle 210) - 1480.00 HT
Precio : 1776.00 € TTC (x1)
Cadre de ventilateur électrique - 75.00 HT
Precio : 90.00 € TTC (x2)

Rotule de berceau (sans fourche) - 192.03 € HT
Precio : 230.44 € TTC (x1)

Plaques de maintien crapotine Version XL 2 x 19.65 HT - 39.30 HT
Precio : 47.16 € TTC (x2)

Mécanisme d'embrayage renforcé (le VM, le disque et le méca doivent être montés ensemble) = 397.20 HT
Precio : 476.64 € TTC (x1)

partie centrale avec absorption - 450.00 HT
Precio : 540.00 € TTC (x1)

Roulements spéciaux 2 x 95.00 HT - 190.00 HT
Precio : 227.24 € TTC (x1)
Total : 105043.45 € TTC