
Capteur phasage S42
Precio : 118.40 € TTC (x3)

Récepteur embrayage (pour cloche S42) diamètre 22.20 - 75.00 HT
Precio : 89.70 € TTC (x1)

Bocaux Maitre Cylindre de frein excentrés - 2 x 24.50 = 49.00 HT
Precio : 58.80 € TTC (x1)

Injecteur Gros débit pour Simple rampe (prix unitaire)
Precio : 198.54 € TTC (x3)

Plaque instrumentation Alu nue à peindre ou pose feutrine - 115.00 € HT
Precio : 138.00 € TTC (x1)

Alpha Z - 1081.94 HT
Precio : 1298.33 € TTC (x2)
Faisceau moteur Double rampe (8 injecteurs)
Precio : 1495.00 € TTC (x2)

Disjoncteur Thermique avec déclenchement 10/15/20 ou 25 AMP - 47.31 HT (PLUS LIVRABLE)
Precio : 56.77 € TTC (x1)

Maître cylindre acier (petit diamètre) double circuit sans assistance - 389.00 HT
Precio : 466.80 € TTC (x1)

Amortisseurs spéciaux GrA pour montage sur fusée origine 2 x 430.00 = 860.00 HT
Precio : 1032.00 € TTC (x1)

Joint de culasse multi-feuille DS S42 Ep. 1.8mm Diam. 87mm (pour un RP sup. à 13)- 435.00 HT
Precio : 522.00 € TTC (x1)

Témoin vert Charge Alternateur - 19.80 HT
Precio : 23.76 € TTC (x4)

Sonde température air
Precio : 69.37 € TTC (x3)

Potentiomètre (capteur papillon)- 283.00 HT
Precio : 339.60 € TTC (x2)

Jambes de force pour Bilstein diam 41 / nues - 2 x 378.25 = 756.50 HT
Precio : 907.80 € TTC (x1)

Support bobine acier + boulons = 59.00 HT
Precio : 70.80 € TTC (x3)

Poulie diam. 75 alu alternateur = 108.00 HT
Precio : 129.60 € TTC (x1)

Démarreur pour S42 léger (-1.2 kg) - 520.78 HT
Precio : 624.94 € TTC (x3)

Câble de réglage palommier de répartiteur mécanique 3/8me par 75 cm - 93.00 HT
Precio : 111.60 € TTC (x1)

Connectique de communication pour boîtier SRA-E - 49.00 HT
Precio : 58.60 € TTC (x2)

Câble de liaison Ethernet (entre boîtier et ordinateur)- 17.56€ HT
Precio : 21.00 € TTC (x3)
Support batterie Alu - 50.00 HT
Precio : 59.80 € TTC (x3)

Emetteur pression essence ou huile 0-10 BARS - 179.40 HT
Precio : 215.28 € TTC (x4)

Kit levier ultra léger alu rigide - 118.00 € ht
Precio : 141.60 € TTC (x1)
Precio : 0.00 € TTC (x1)

Joint de carter bas moteur "à gorge" = 28.67 HT
Precio : 34.40 € TTC (x1)

Fourche excentrée de fixation rotule sup AR amort. = 2 x 128.00 = 256.00 HT
Precio : 307.20 € TTC (x1)
Kit complet Evolutif avec faisceau, 8 injecteurs et accessoires (Magneti Marelli SRA-E)
Precio : 3827.20 € TTC (x2)
Boulons de bielle S42 suivant marque et modèle (prix sur demande de 19 à 30 euro)
Precio : 0.00 € TTC (x1)

Sonde T° 150°C 10 x 100 Spécifique STACK - 73.66 HT
Precio : 88.39 € TTC (x2)

Support pédalier GR.A - 185.00 HT
Precio : 222.00 € TTC (x1)

Maitre Cylindre AP AV - 218.00 HT (photo non contractuelle)
Precio : 261.60 € TTC (x1)

Maitre Cylindre d'embrayage - 197.00 HT (photo non contractuelle)
Precio : 236.40 € TTC (x1)

Sonde température air
Precio : 69.00 € TTC (x2)
Bougies Racing (SP moteur S42) Prix unitaire de 29.30 à 54.80 euro TTC suivant modèle
Precio : 0.00 € TTC (x1)
Petit Kit complet injection avec faisceau et 4 injecteurs et accessoires
Precio : 2930.20 € TTC (x3)
Jeu de plaquettes Rallye, Côte, Circuit de 137.00 à 228.00 euros" (nous consulter)
Precio : 0.00 € TTC (x1)

Joint de queue de soupape S42 diam. 5 (prix unitaire) - 6.04 HT
Precio : 7.25 € TTC (x1)

Rotules spéciales de direction noyau diam 12 pas à Droite 2 x 88.00 HT - 176.00 HT
Precio : 211.20 € TTC (x2)

Capteur d'allumage / cloche - 129.33 HT
Precio : 155.20 € TTC (x1)
Pont complet origine rapport 3.08 en E.ST - 1180.60 HT
Precio : 1412.00 € TTC (x1)

Sonde température eau
Precio : 53.22 € TTC (x3)

Témoin rouge Alarme - 19.80 HT
Precio : 23.76 € TTC (x4)

Carter de distribution orig. - 289.02 HT
Precio : 346.82 € TTC (x1)

Phare normal Valéo - 283.16 HT
(Poids : 2.485 kg)
Precio : 339.79 € TTC (x1)

Excentreur de fixation amortisseur AR / caisse - 4 x 25.00 = 100.00
Precio : 120.00 € TTC (x1)

Capteur de régime long S14 / S42
Precio : 113.62 € TTC (x1)

Coupelles de ressort Supérieures Titane Admission (prix pièce)- 44.31 HT
Precio : 53.00 € TTC (x1)

Témoin 4 couleurs 12V - 25.25 € HT
Precio : 30.30 € TTC (x1)

Poulie distri. regl. BMW M20 - 211.00 HT
Precio : 253.20 € TTC (x1)

Embout de fil à bougie pour bobine creuse (prix unitaires)- 22.30 HT
Precio : 26.76 € TTC (x2)

Maître cylindre Alu (diamètre 23,80) double circuit sans assistance - 549.00 HT
Precio : 658.80 € TTC (x1)

Cale pied alu pilote - 142.00 HT
Precio : 170.40 € TTC (x1)
Faisceau moteur Simple rampe (4 injecteurs)
Precio : 1291.68 € TTC (x2)

Volant Moteur pour embrayage diam. 184 Moteur S42 (4.2 Kg)- 530.00 HT
Precio : 636.00 € TTC (x1)

Courroie Générale SP pour poulie alt. diam. 60 orig. - 35.00 HT
Precio : 42.00 € TTC (x1)

Compte tour Stack ST200 0.4-10.5 D.80 noir - 420.83 HT
Precio : 505.00 € TTC (x2)

Piston diam. 86,40 pour alesage 86.50 pour course 85 axe de 18 - 336.00 HT
Precio : 403.20 € TTC (x1)
Kit freinage complet (diamètre 355) 6 pistons AP ; plaquettes ; fixations - 4354.52 HT
Precio : 5208.00 € TTC (x1)

Boitier de prise pompe à essence - 15.80 HT
Precio : 18.96 € TTC (x1)

Tableau de bord complet : plaque support instrumentation Alu, manomètres, voyants à partir de 630.00 € HT
Precio : 0.00 € TTC (x1)

Bobine 2 sorties - 2 x 54.00 = 108.00 ht
Precio : 129.60 € TTC (x3)

Kit complet plaque AR Vilebrequin Motorsport - 75.28 HT
Precio : 90.03 € TTC (x1)

Support acier noir (à visser ou à souder) - 55.00 € ht
Precio : 66.00 € TTC (x1)

Support de disjoncteurs thermiques clipsables à visser - 20.03 HT (x4) (PLUS LIVRABLE)
Precio : 24.03 € TTC (x3)

Combiné AR complet / base Bilstein = 2 x 747.00 = 1494.00 HT
Precio : 1792.80 € TTC (x1)

Capteur de vitesse à voyant pour Stack - 120.00 HT
Precio : 143.52 € TTC (x1)

Faisceau électrique de caisse multiplexé avec modification comodo
Precio : 0.00 € TTC (x1)

Support boitier GR.A "Motronic" - 135.00 HT
Precio : 162.00 € TTC (x2)
EPROM ALPHA Z
Precio : 538.00 € TTC (x1)

Soufflet de tunnel - 18.20 € ht
Precio : 21.84 € TTC (x1)

Pare choc AV orig. - 1115.00 HT
Precio : 1338.00 € TTC (x2)
Eprom Gr A adaptée
Precio : 574.00 € TTC (x2)

Anti-parasite seul /embout de fil à bougie (S42)- 65.00 HT
Precio : 78.00 € TTC (x1)

Couple gros pont 5.44 (210mm) SADEV- 2680.00 HT
Precio : 3216.00 € TTC (x1)

Console centrale équipée ( disjoncteur / inter. / jauge / coupe circuit / etc..) - 448.00 HT
Precio : 537.60 € TTC (x1)

Faisceau 2ème rampe dans boîte à air (seul)
Precio : 275.08 € TTC (x2)

Maitre Cylindre frein à main - 197.00 HT (photo non contractuelle)
Precio : 236.40 € TTC (x1)

Support Alu pour fixation disjoncteurs et coupe circuit - 95.00 HT
Precio : 114.00 € TTC (x1)
Maitre cylindre spécial gros diam. - 433.21 ht
Precio : 519.85 € TTC (x1)

Kit 8 disjoncteurs à déclanchement
(10A, 15A ou 25A) + 4 supports disjoncteurs et 1 support Alu - 559.36 HT
Precio : 669.00 € TTC (x1)
Faisceau fils à bougie Moteur S42 - 324.00 HT
Precio : 388.80 € TTC (x3)

Guide ressort sur combiné diamètre 56 mm - 18.30 HT
Precio : 21.96 € TTC (x1)

Pédale de frein acier GR.A pour palonnier - 495.00 HT
Precio : 594.00 € TTC (x1)

Boîtier de gestion électronique SRA-E - 1395.00 € HT
Precio : 1668.42 € TTC (x1)

Plaque support de maître cylindre Alu - 78.00 HT
Precio : 93.60 € TTC (x1)

Injecteur Petit débit pour 1ère rampe (prix unitaire)
Precio : 125.58 € TTC (x3)
Modification du faisceau moteur origine en GrA
Precio : 956.00 € TTC (x1)

Batterie 34 AH 250/97/152 - 230.00 HT
Precio : 275.08 € TTC (x1)
Ventilateur électrique spécial F2000 (prend eau et huile) - 327.68 HT
Precio : 393.22 € TTC (x1)

Injecteur Gros débit pour 2ème rampe (prix unitaire)
Precio : 163.85 € TTC (x1)
Kits boulonnerie cardan 2 x 29.68 HT - 59.36 HT
Precio : 71.00 € TTC (x1)
Bielle en H moteur S42 - 295.00 HT
Precio : 352.82 € TTC (x1)

Support Alu pour disjoncteurs et coupe circuit - 130.00 HT
Precio : 156.00 € TTC (x1)

Centreur de ressort alu = 2 x 14.63 = 29.26 HT
Precio : 35.11 € TTC (x1)

Couple petit pont 5.28 (188mm) - 1580.00 HT
Precio : 1896.00 € TTC (x1)

Porte filtre à air GrA pour passage pompe DA - 230.00 € HT
Precio : 276.00 € TTC (x1)

Disjoncteur Thermique sans déclenchement 10/15/20 ou 25 AMP - 38.28 HT (PLUS LIVRABLE)
Precio : 45.94 € TTC (x1)

Boîte 6 manuelle SADEV(consigne 3000 € ou boîte 5 OR M3 E30)- 13882.00 HT
Precio : 16658.40 € TTC (x1)

Phare Xénon Valéo - 564.02 HT
(Poids : 3.476 kg)
Precio : 676.82 € TTC (x1)
Arbre à cames ECH S42 280° 12.70 de levée - 650.00 HT
Precio : 780.00 € TTC (x1)
Arbre à cames ADM S42 314° 12.50 de levée - 680.00 HT
Precio : 813.28 € TTC (x1)

Kit fiches femelle rond pompe ess. 4 x 4.80 = 19.20 HT
Precio : 23.04 € TTC (x1)

Amortisseurs AR Nu C2P - 2 x 883.40 HT - 1766.80 HT
Precio : 2120.16 € TTC (x1)
Kit freinage (diamètre 332) : étriers 4 pistons AP (montage sur fusées origines)- 4207.72 HT
Precio : 5049.26 € TTC (x1)

Coussinets de palier Diamètre 50 Moteur S42V98 (prix pièce)- 98.90 HT
Precio : 118.68 € TTC (x1)

Disque AV GR.A diam.332/32/203.20/12T - 2 x 628.50 = 1257.00 HT
Precio : 1508.40 € TTC (x1)
Arbre à cames ADM S42 312° 13.10 de levée - 850.00 HT
Precio : 1016.60 € TTC (x1)
MO suppression ABS avec bouton - 155.52 HT
Precio : 186.00 € TTC (x1)
Berceau origine "de base" - 349.14 HT
Precio : 417.58 € TTC (x1)

Amortisseur AR alu Bilstein nu = 2 x 365.00 = 730.00 HT
Precio : 876.00 € TTC (x1)

Ressorts de soupape ADM S42 pour soupape Titane (prix pièce)- 40.25 HT
Precio : 48.30 € TTC (x1)
Kit faisceau caisse complet avec disjoncteurs thermiques - 2800.00 HT
Precio : 3348.80 € TTC (x1)
Pastille de réglage de soupape MOTORSPORT diam 5 longue Echappement épaisseur 1.20 à 3 mm - 18.80 HT
Precio : 22.48 € TTC (x1)

Etrier de frein AR 4P AP pour fusée orig. S1 = 2 x 658.00 = 1316.00 HT
Precio : 1579.20 € TTC (x1)
Pastille de réglage de soupape MOTORSPORT diam 6 ou 5 épaisseur 1.20 à 3 mm - 16.80 HT
Precio : 20.09 € TTC (x1)

Soupape ADM Titane S42 tige de 5 diam. 35 (prix pièce)- 147.00 HT
Precio : 176.40 € TTC (x1)

Potentiomètre pour guillotine S14 et S42 = 395.00 HT
Precio : 474.00 € TTC (x1)

Kit 12 boulons de bol fixation disque (long 26 sous tête) = 46.33 HT
Precio : 55.60 € TTC (x1)

Boîte à air Carbone simple sur pipe origine - 799.33€ HT
Precio : 956.00 € TTC (x1)

Tableau de bord Stack complet 10500 TR avec sonde - 1490.00 HT
Precio : 1788.00 € TTC (x1)
Modification du glissement limité origine à 75 % (si bon état de base) = 1480.00.00 HT
Precio : 1776.00 € TTC (x1)

Tendeur de courroie Générale S42 - 79.75 HT
Precio : 95.38 € TTC (x1)
Faisceau fils à bougie Moteur S14 (sans fil de bobine) - 480.00 HT
Precio : 576.00 € TTC (x1)

Volant moteur couronne diam 250mm - 680.00 HT
Precio : 816.00 € TTC (x1)

Supports étrier GR.A pour fusée TDC 2 x 349.00 = 698.00 HT
Precio : 837.60 € TTC (x1)
Kit complet avec faisceau, 4 injecteurs et accessoire (Magneti Marelli)
Precio : 2750.00 € TTC (x1)

Main de support de tirant de chasse en alu = 2 x 148 HT - 296.00 HT
Precio : 355.20 € TTC (x1)

Goujons longs supérieurs de pont 2 x 28.00 HT - 56.00 HT
Precio : 67.20 € TTC (x1)
Arbre à cames ADM S42 284° 13.20 de levée - 650.00 HT
Precio : 777.40 € TTC (x1)

Bloque roulement carter AR - 116.00 € ht
Precio : 139.20 € TTC (x1)
Coussinet de bielle Diamètre 42 Moteur S42V98 (prix pièce)- 55.15 HT
Precio : 66.18 € TTC (x1)
Kit coupelles, contre-coupelles, chapeaux de ressorts - 2 x 99.92 HT - 199.84 HT
Precio : 239.81 € TTC (x2)
Pistons S14 93.52 de diamètre et 84.00 de course - 281.77 HT
Precio : 337.00 € TTC (x1)

Damper S42 renforcé amorti 60-2 - 352.00 € HT
Precio : 422.40 € TTC (x1)

Radiateur d'huile nu.
500 de long sur 10 rangées.
Prix : 261.00 HT
Precio : 313.20 € TTC (x1)

Disque de frein AR GR.N (312x20) 2 x 138.50 = 277.00 HT
Precio : 332.40 € TTC (x1)

Entretoises de rotule sur berceau 4 x 12.00 HT - 48.00 HT
Precio : 57.60 € TTC (x1)

Fourchette modifiée pour cloche adaptation S42 pour boîte séquentielle 26Kg - 85.00 HT
Precio : 102.00 € TTC (x1)

Ecrous Ø 7 de collecteur sur culasse - 16 x 1.55 - 24.80 HT
Precio : 29.60 € TTC (x1)
kit plots de main (diam.10)(4 plots / 1 main) = 8 x 5.80 = 46.40 HT
Precio : 55.68 € TTC (x1)
Ligne GR.A sortie AR 100 db comprenant (double Y / ligne int avec absorbeur / silencieux AR + sortie) = 1910.00 HT
Precio : 2292.00 € TTC (x1)
Kit silentblocs durs de bras oscillant - 119.57 HT
Precio : 143.00 € TTC (x1)

Joint de Carter Inférieur (S42) Caoutchouc - 19.87 HT
Precio : 23.76 € TTC (x1)

Pare-chocs AR Polyester L - 245.00 HT
Precio : 293.02 € TTC (x1)

Capot moteur Polyester - 279.26 HT
Precio : 334.00 € TTC (x1)

Triangle modifié avec voie réglable (prix unitaire) = 341.14 HT
Precio : 409.37 € TTC (x1)

Option disque flottant - 2 x 149.55 = 299.10 HT (pièce et usinage)
Precio : 358.92 € TTC (x1)

Photo train AV Tour de Corse
Precio : 0.00 € TTC (x1)

Bloque barre stab latéral - 2 x 35 = 70.00 € ht
Precio : 84.00 € TTC (x1)
Rampe pour injecteurs S42/pipe - 275.00 HT
Precio : 330.00 € TTC (x1)

Contre-coupelles 2 x 32.61 - 65.22 HT
Precio : 78.26 € TTC (x1)

Pion centreur de cardan - 9.80 HT pièce
Precio : 11.76 € TTC (x1)

Supports étrier pour fusée d'origine (nu) - 2 x 288.00 = 576.00 € HT
Precio : 595.20 € TTC (x1)

Ensemble fiche Potentiomètre - 35.80 HT
Precio : 42.96 € TTC (x1)

Circlips de moyeu - 8.36 HT
Precio : 10.03 € TTC (x1)

Portes moyeu usinés dans la masse 2 x 850.00 HT - 1700.00 HT
Precio : 2033.20 € TTC (x1)

Soupapes Echappement Titane diamètre 30,5 (prix pièce)- 151.34 HT
Precio : 181.00 € TTC (x1)

Crapotine sup AV / rotule SP - 2 X 159.70 HT = 319.40 HT
Precio : 383.28 € TTC (x2)

Volant moteur léger pour embrayage diam.184 Moteur S42 (2.9kg) - 585.00 HT
Precio : 702.00 € TTC (x1)

Joint collecteur échappement sur culasse S42 Motorsport - 2 x 55.20 HT - 110.40 HT
Precio : 132.48 € TTC (x1)

Mains Acier (droite et gauche) "sans traitement" 2 x 351.00 = 702.00 HT
Precio : 842.40 € TTC (x1)
Cadre de ventilateur électrique - 75.00 HT
Precio : 90.00 € TTC (x1)

Démarreur S14 - 385.00 HT
Precio : 462.00 € TTC (x1)

Soufflet diam. 108 6T = 48.52 HT (pièce)
Precio : 58.22 € TTC (x1)

Ressorts principaux - 2 x 129.60 HT - 259.20 HT
Precio : 311.04 € TTC (x1)

Barre stabilisatrice réglable(4)diam 26 Rallye - 557.00 HT
Precio : 668.40 € TTC (x1)

Disque de friction DS (diam. 103,75mm /2.5) (pour autobloquant et glissement limité) Gros Pont - 127 € HT
Precio : 152.40 € TTC (x1)

Porte roulement "sans traitement" = 179.77 € HT (prix unitaire)
Precio : 215.72 € TTC (x1)
Usinage Damper GrA pour adaptation courroie D.A. - 94.48 HT
Precio : 113.38 € TTC (x1)
Arbre à cames ECH S42 300° 11.30 de levée - 680.00 HT
Precio : 813.28 € TTC (x1)

Bagues de coulisse amortisseur (diamètre 41) 2 x 35.01 HT - 70.02 HT
Precio : 84.02 € TTC (x1)

Patte de tendeur de D.A. orig - 43.45 HT
Precio : 52.14 € TTC (x1)
Usinage Damper GrA - 94.48 HT
Precio : 113.00 € TTC (x1)

Tulipe de nez de gros pont - 244.00 HT
Precio : 292.80 € TTC (x1)

Disque de friction ZF (diam. 103,75mm) (pour autobloquant et glissement limité) Gros Pont - 98.00 HT (PLUS LIVRABLE)
Precio : 117.21 € TTC (x1)
Boulon de bielle renforcé (prix pièce)- 33.44 HT
Precio : 40.00 € TTC (x1)

Biellettes de barre Stab AV nues - 2 x 107.00 = 214.00 HT
Precio : 256.80 € TTC (x2)

Pochette de joints pour boite 6 Sadev = 142.00 HT
Precio : 170.40 € TTC (x1)
Silentbloc support moteur seul (prix unitaire)- 55.00 HT
Precio : 65.78 € TTC (x1)

Rotule supérieure amortisseur AR - 2 x 74.38 - 148.76 HT
Precio : 178.51 € TTC (x1)

Rétroviseur carbone light réglable avec miroir - 2 x 153.50 = 307.00 € ht
Precio : 368.40 € TTC (x2)
Kit coussinets Teflon du barre stabilisatrice - 35.95 HT
Precio : 43.00 € TTC (x1)

Kit joint de cache culbuteur - 44.00 HT
Precio : 52.62 € TTC (x1)

Biellettes complètes (avec boulonnerie et entretoises) de barre Stab AV réglables - 2 x 143.00 = 286.00 HT
Precio : 343.20 € TTC (x1)

Evo. grosse pompe à huile - 450.00 HT
Precio : 540.00 € TTC (x1)

Calle latérale de 3.41 à 3.49 (jaune/bleu/rouge) - 78.50 HT (prix unitaire)
Precio : 94.20 € TTC (x1)

Tole d'embout lobro diam 108 = 24.84 HT (pièce)
Precio : 29.81 € TTC (x1)
Plaquettes de frein de 150.00 à 340.00 euros selon choix
Precio : 0.00 € TTC (x1)
Courroie de D.A. S42 sans tendeur - 48.36 HT
Precio : 58.03 € TTC (x1)

Bol avant GR.A "anodisé" - + 30€ ht
Precio : 0.00 € TTC (x1)

Chapeaux de ressort (diam 60)- 2 x 49.75 HT - 99.50 HT
Precio : 119.40 € TTC (x1)

Moyeu de Roue AV origine - 676.00 HT
Precio : 811.20 € TTC (x1)

Barreau renforcé GR.A pour cardan 41/5/46.5 = 385.00 € ht
Precio : 462.00 € TTC (x1)
Réservoir de D.A + support - 52.68 HT
Precio : 63.00 € TTC (x1)
Kit combinés complet Piste AV et AR - 1800.00 HT
Precio : 2160.00 € TTC (x1)

Rotule côté crémaillère = 128.33 HT
Precio : 154.00 € TTC (x1)

Piston tendeur de chaine S42 - 144.00 HT
Precio : 172.80 € TTC (x1)

Kit plaques d'appui avec rondelles frein (pour une cardan) - 34.80 € ht
Precio : 41.76 € TTC (x1)
Ressorts Rallye 2 x 125.00 HT - 250.00 HT
Precio : 300.00 € TTC (x1)

Sélection simple (levier / platine) = 180.00 HT
Precio : 216.00 € TTC (x1)

Liteau à coussinet d'echappement S42 - 1089.00 HT (dispo. en date du 13/02/2017)
Precio : 1306.80 € TTC (x1)

Couple petit pont 5.44 (188mm)- 1580.00 HT
Precio : 1896.00 € TTC (x1)
Huile spéciale autobloquant - 38.46 HT
Precio : 46.15 € TTC (x2)

4 pistons BMW M10 GR2 diam.89.22/89.50 - 135 mm = 4 x 210.00 = 840.00 € HT
Precio : 1008.00 € TTC (x2)

Filtre à air - 98.66 HT
Precio : 118.00 € TTC (x1)

Cardan GR.A Motorsport = 896.00 € ht (P.U.)
Precio : 1075.20 € TTC (x1)

Support pompe de D.A alu renforcé (sans silentbloc) = 320 € ht
Precio : 384.00 € TTC (x1)
Usinage complet des carters (pour montage Sadev) - 468 € ht
Precio : 561.60 € TTC (x1)

Chapes de rotule / berceau (fourche) 2 x 254.00 = 508.00 ht
Precio : 609.60 € TTC (x1)

Disque de friction DS (diamètre 88 / 23C / 2 mm) pour autobloquant et glissement limité - Petit Pont - 72.52 HT
Precio : 87.02 € TTC (x1)
Barre anti-rapprochement Alu spéciale compétition;Barre anti-rapprochement Alu spéciale compétition
Precio : 263.00 € TTC (x1)

Biellette de colonne de direction (pour D.A.)- 253.00 HT (plus livrable pour le moment)
Precio : 303.60 € TTC (x1)

Cale de butée hydraulique - 52.27 HT
Precio : 62.72 € TTC (x1)

Vilebrequin moteur S42 course 85 EVO1 (13.070 kg)- 2670.00 HT
Precio : 3204.00 € TTC (x1)

Coupelles longues 2 x 79.85 - 159.70 HT
Precio : 191.64 € TTC (x1)

Modification en combiné des portes amortisseurs origines 2 x 265 HT - 530.00 HT
Precio : 636.00 € TTC (x1)

Tubes filetés (pour modification)- 2 x 139.63 HT - 279.26 HT
Precio : 335.11 € TTC (x1)

Roulements spéciaux 2 x 95.00 HT - 190.00 HT
Precio : 227.24 € TTC (x1)
Kit bagues haut direct sur pivot usiné - 67.73 HT
Precio : 81.00 € TTC (x1)

Poulie de D.A courroie plate - 89.00 HT
Precio : 106.80 € TTC (x1)

Chapeaux de ressort (diamètre 65) 2 x 49.75 HT - 99.50 HT
Precio : 119.40 € TTC (x1)

Kit flector renforcé + 6 vis + 6 écrous - 197.00 HT
Precio : 236.40 € TTC (x1)

Support guide poussoir Moteur S42 (prix unitaire)- 62.00 HT
Precio : 74.15 € TTC (x1)

Kit joint carter de distribution "partiel"
(seulement si on change le joint de culasse) 15.80€ HT
Precio : 18.90 € TTC (x1)
Ressorts Côte - 2 x 125.00 HT - 250.00 HT
Precio : 300.00 € TTC (x1)

Joints de haut d'amortisseur (diamètre 41) 2 x 29.17 HT - 58.34 HT
Precio : 70.01 € TTC (x1)

Carter de gros pont ALU type 210 (6.4 kg) - 2399.26 HT
Precio : 2879.11 € TTC (x1)

Disques spéciaux Lisses (diamètre 312) 2 x 298.00 = 596.00 HT
Precio : 715.20 € TTC (x1)

Pompe de D.A HP pour dir. directe echg std (consigne 75 € HT) - 582.00 HT
Precio : 698.40 € TTC (x1)

Rotule de crapotine (diam. 18 int.) 2 x 99.80 = 199.60 HT
Precio : 239.52 € TTC (x1)

Rondelles Belleville ZF Petit Pont 2 x 34.70 HT - 69.40 HT
Precio : 83.00 € TTC (x1)

Potentiomètre papillon (S42) - 75.00 HT
Precio : 90.00 € TTC (x1)

Rotules grand angle spéciales 4 x 233.40 HT = 933.60 HT
Precio : 1120.32 € TTC (x1)

Kit boulons / joints pour flexible HP D.A. - 22.00 € HT
Precio : 26.40 € TTC (x1)

Biellette réglable sur rotule de pipe admission - 95.00 HT
Precio : 114.00 € TTC (x1)

Couple conique 3.91 Gros pont (210mm)- 1285.00 HT
Precio : 1536.86 € TTC (x1)

Boulons SP et entretoise pivot - 2 x 38.00 = 76.00 HT
Precio : 91.20 € TTC (x1)

Kit boulonnerie rondelle / cale pour support étrier pour jambe d'origine / étrier = 2 x 42.00 = 84.00 € ht
Precio : 100.80 € TTC (x1)

Coupelle de ressort inf. ADM S42 (prix pièce) - 28.00 HT
Precio : 33.60 € TTC (x1)

Kit des 2 supports Alu de barre stabilisatrice avec boulonnerie - 82 HT
Precio : 98.40 € TTC (x1)

Biellettes de direction longues renforcées sur fusées origines (alésage cône) 2 x 149.67 HT - 299.34 HT
Precio : 358.00 € TTC (x1)

Biellette de direction TDC complète (avec soufflet)= 628.00 HT
Precio : 753.60 € TTC (x1)
Guides de ressort - 2 x 14.63 HT - 29.26 HT
Precio : 35.11 € TTC (x1)

Ecrou de moyeu AR - 9.80 € ht
Precio : 11.76 € TTC (x1)
Kit boulonnerie d'amortisseur - 19.23 HT
Precio : 23.08 € TTC (x1)

Ventilateur alternateur alu - 98.00 HT
Precio : 117.60 € TTC (x1)

Rotule SMG25 + rotule renforcée conique (prix unitaire)- 268.00 HT
Precio : 321.60 € TTC (x1)

Coussinets de bielle Motorsport Diamètre 45 V96 S42 (Prix unitaire)- 42.90 HT
Precio : 51.31 € TTC (x1)

Kit moyeu AR + flasque (qui se monte sur base origine) = 389.00 HT (prix unitaire)
Precio : 466.80 € TTC (x1)
Couple 3.64 -20 % par rapport à l'origine - REGLEMENTATION GT
Precio : 0.00 € TTC (x1)

Crapotines complètes (petit diamètre) réglables en hauteur 2 x 419.60 HT - 839.20 HT
Precio : 1007.04 € TTC (x1)

Tulipe de pont renforcée (diamètre 112) PP (diamètre axe 30) 2 x 222.61 = 445.22 HT (pas dispo en ce momment)
Precio : 534.26 € TTC (x1)

Kit joints de réparation butée hydraulique - 45.00 HT
Precio : 53.82 € TTC (x1)

Silencieux AR RACING version légère droit OO (diamètre 80) et gauche OO (diamètre 80)" - 1904.00 HT
Precio : 2284.80 € TTC (x1)

Carter central boite Getrag taillé dans la masse - 3200.00 € ht
Precio : 3840.00 € TTC (x1)
Biellette de direction Complète origine 2 x 122 HT - 244.00 HT
Precio : 291.82 € TTC (x1)

Circlips de rotule (diam. 37 ext.) 2 x 4.60 = 9.20 HT
Precio : 11.04 € TTC (x1)

Flasque INT de moyeu AR - 317.00 HT
Precio : 380.40 € TTC (x1)

Rotule gros diam. aviat/ surclips - 122.41 x 2 = 244.82 HT
Precio : 293.78 € TTC (x1)
Kit silentblocs durs pour barre stabilisatrice origine - 55.18 HT
Precio : 66.00 € TTC (x1)

Bras de triangle 2 x 340.00 = 680.00 HT
Precio : 816.00 € TTC (x1)

Boîte à air Carbone type double injection sur guillotine ou papillon - 2500.00 HT
Precio : 2990.00 € TTC (x1)

Support moteur S14 côté gauche (avec silentbloc)- 359.00 HT
Precio : 430.80 € TTC (x1)

Ressorts de soupape ECH S42 pour soupape Titane (prix pièce)- 40.25 HT
Precio : 48.30 € TTC (x1)

Pièces de remplacement silentbloc pompe D.A - 2 x 18.30 = 36.60 ht
Precio : 43.92 € TTC (x1)

Rotule de berceau (sans fourche) - 192.03 € HT
Precio : 230.44 € TTC (x1)

Circlips de moyeu 2 x 7.11 HT - 14.22 HT
Precio : 17.00 € TTC (x1)

Disque intérieur pour embrayage bi ou tri-disques - 220.00 HT
Precio : 264.00 € TTC (x1)

Connecteur boîtier SRA-E pour faisceau - 80.00 HT
Precio : 95.68 € TTC (x1)
Glaces de rétroviseur extérieur Droite et Gauche (verre/miroir) 2 x 28.80 = 57.60 € ht
Precio : 69.12 € TTC (x1)

Tôle de séparation - 157.00 HT
Precio : 188.40 € TTC (x1)

Récepteur embrayage (pour cloche S14) Alu Diamètre 20,64 - 196.00 HT
Precio : 235.20 € TTC (x1)

Biellette de direction Type origine Renforcée côté crémaillère - 78.80 HT
Precio : 94.56 € TTC (x1)
Arbre à cames ECH S42 304° 12.60 de levée - 850.00 HT
Precio : 1016.60 € TTC (x1)
Traverse support de boite à vitesses manuelles - 380.00 HT
Precio : 454.48 € TTC (x1)

Porte roulement zingué = + 30 € ht
Precio : 0.00 € TTC (x1)

Supports de chasse réglables sur rotule 2 x 168.48 HT - 336.96 HT
Precio : 403.00 € TTC (x1)

Kit joints nécessaires de Gros Pont - 94.92 HT
Precio : 113.90 € TTC (x1)
Kits boulonnerie : 2 berceaux, 2 mains/longeron, 2 mains/fusée,
contre-écrous de rotules 2 x 85.00 HT - 170.00 HT
Precio : 204.00 € TTC (x1)

Coupelle de ressort inf. ECH S42 (prix pièce)- 28.00 HT
Precio : 33.60 € TTC (x1)

Chape de biellette de direction côté crémaillère "rallye" = 120.00 HT
Precio : 144.00 € TTC (x1)

Tableau de bord Stack complet 10500 TR avec sonde - 1490.00 HT
Precio : 1788.00 € TTC (x1)

Kit boulonnerie support étrier (fusée TDC) = 32.00 € ht (pour un support)
Precio : 38.40 € TTC (x1)

Mécanisme embrayage diamètre 184 (bi-disques)- 794.00 HT
Precio : 952.80 € TTC (x1)

Lobro renforcé diam 108 ep. 40 28c = 267.00 HT (pièce)
Precio : 320.40 € TTC (x1)

Plateau presseur pour mécanisme embrayage diamètre 184 - 239.88 HT
Precio : 287.86 € TTC (x1)
Volant moteur light BMW M3 E30 S14 184mm cible 60-2 dents = 643.00 € ht
Precio : 771.60 € TTC (x1)

Tulipe courte pour boîte SADEV - 182.00 HT
Precio : 218.40 € TTC (x1)

Récepteur embrayage (pour cloche S42) diamètre 20.64 - 95.00 HT
Precio : 113.62 € TTC (x1)

Jambe Tour de corse nue (mécano soudé)- 2 x 679.85 = 1359.70 HT
Precio : 1631.64 € TTC (x1)

Coupelles vissantes 2 x 37,63 - 75.26 HT
Precio : 90.31 € TTC (x1)

Poussoir Carré S42 (prix pièce)- 140.00 HT
Precio : 168.00 € TTC (x1)

Goujons de roue type Prodrive avec écrou (Prix unitaire)- 31.00 HT
Precio : 37.20 € TTC (x1)

Crapotines complètes (gros diamètre) réglables en hauteur 2 x 479.93 HT - 959.86 HT
Precio : 1151.83 € TTC (x1)

Crapotines supérieures (hauteur non réglables)- 2 x 239.00 = 478.00 HT
Precio : 573.60 € TTC (x1)
Ventilateur électrique Spécial F2000 (prend eau et huile)- 280.00 HT
Precio : 334.88 € TTC (x1)

Kit coussinets teflon - 48.00 € HT
Precio : 57.60 € TTC (x1)

Cale créneaux ZF (pour autobloquant et glissement limité) Gros Pont - 68.80 HT
Precio : 82.28 € TTC (x1)

Kit papillons préparés diamètre 50 (S42)- 60.00 HT
Precio : 71.76 € TTC (x1)

Kit soufflet tôle / cardan - 87.67 HT
Precio : 105.20 € TTC (x1)

Autobloquant 75 % Motorsport (188) - 1890.00 HT
Precio : 2268.00 € TTC (x1)

Cale de réglage pompe à huile S14 - 87.65 HT
Precio : 104.83 € TTC (x1)
Contre-coupelles vissantes 2 x 27.59 HT - 55.18 HT
Precio : 66.00 € TTC (x1)

Rotules de berceau (petite tête pour passage fourche berceau) 2 x 268.33 = 536.66 HT
Precio : 643.99 € TTC (x1)
Ressorts de soupape SRD7 petit diamètre - 16 x 24.46 HT - 391.36 HT
Precio : 468.00 € TTC (x1)

Moyeu AV type Prodrive zingué + 30€ HT
Precio : 0.00 € TTC (x1)
Total : 191337.28 € TTC